diff --git a/usr/lib/archboot/installer/autoconfiguration.sh b/usr/lib/archboot/installer/autoconfiguration.sh
index 0273e49e0..89b69ce4f 100644
--- a/usr/lib/archboot/installer/autoconfiguration.sh
+++ b/usr/lib/archboot/installer/autoconfiguration.sh
@@ -8,12 +8,12 @@ _auto_timesetting() {
     if [[ -e /etc/localtime && ! -e "${_DESTDIR}"/etc/localtime ]]; then
         _progress "5" "Enable timezone setting on installed system..."
         cp -a /etc/localtime "${_DESTDIR}"/etc/localtime
-        read -r -t 2
+        sleep 2
     fi
     if [[ -f /etc/adjtime && ! -f "${_DESTDIR}"/etc/adjtime ]]; then
         _progress "8" "Enable clock setting on installed system..."
         cp /etc/adjtime "${_DESTDIR}"/etc/adjtime
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -47,7 +47,7 @@ _auto_network()
         cp /etc/systemd/network.conf.d/ipv6-privacy-extensions.conf \
            "${_DESTDIR}"/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf
     fi
-    read -r -t 2
+    sleep 2
 }
 
 _auto_fstab(){
@@ -61,7 +61,7 @@ _auto_fstab(){
         sd -p '^[^#]*' '' "${_DESTDIR}"/etc/fstab
         sort /tmp/.fstab >>"${_DESTDIR}"/etc/fstab
     fi
-    read -r -t 2
+    sleep 2
 }
 
 # add udev rule for schedulers by default
@@ -69,7 +69,7 @@ _auto_scheduler () {
     if [[ ! -f ${_DESTDIR}/etc/udev/rules.d/70-ioschedulers.rules ]]; then
         _progress "24" "Enable performance ioscheduler settings on installed system..."
         cp /etc/udev/rules.d/60-ioschedulers.rules "${_DESTDIR}"/etc/udev/rules.d/60-ioschedulers.rules
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -78,7 +78,7 @@ _auto_swap () {
     if [[ ! -f ${_DESTDIR}/etc/sysctl.d/99-sysctl.conf ]]; then
         _progress "29" "Enable sysctl swap settings on installed system..."
         cp /etc/sysctl.d/99-sysctl.conf "${_DESTDIR}"/etc/sysctl.d/99-sysctl.conf
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -90,7 +90,7 @@ _auto_mdadm()
             _progress "34" "Enable mdadm settings on installed system..."
             mdadm -Ds >> "${_DESTDIR}"/etc/mdadm.conf
         fi
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -103,7 +103,7 @@ _auto_luks() {
         cat /tmp/.crypttab >> "${_DESTDIR}"/etc/crypttab
         chmod 700 /tmp/passphrase-* 2>"${_NO_LOG}"
         cp /tmp/passphrase-* "${_DESTDIR}"/etc/ 2>"${_NO_LOG}"
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -112,7 +112,7 @@ _auto_pacman_keyring()
     if ! [[ -d ${_DESTDIR}/etc/pacman.d/gnupg ]]; then
         _progress "47" "Enable pacman's GPG keyring files on installed system..."
         cp -ar /etc/pacman.d/gnupg "${_DESTDIR}"/etc/pacman.d &>"${_NO_LOG}"
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -121,7 +121,7 @@ _auto_testing()
     if rg -q '^\[core-testing' /etc/pacman.conf; then
         _progress "53"  "Enable [testing] repository on installed system..."
         sd '^#(\[[c,e].*-testing\]\n)#' '$1' "${_DESTDIR}"/etc/pacman.conf
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -138,7 +138,7 @@ Server = "${_SYNC_URL}
 EOF
         cat "${_DESTDIR}"/etc/pacman.d/mirrorlist >> /tmp/inst-mirrorlist
         mv /tmp/inst-mirrorlist "${_DESTDIR}/etc/pacman.d/mirrorlist"
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -146,7 +146,7 @@ _auto_vconsole() {
     if [[ ! -f ${_DESTDIR}/etc/vconsole.conf ]]; then
         _progress "69" "Setting keymap and font on installed system..."
         cp /etc/vconsole.conf "${_DESTDIR}"/etc/vconsole.conf
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -154,7 +154,7 @@ _auto_hostname() {
     if [[ ! -f ${_DESTDIR}/etc/hostname ]]; then
         _progress "76" "Set default hostname on installed system..."
         echo "myhostname" > "${_DESTDIR}"/etc/hostname
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -166,7 +166,7 @@ _auto_locale() {
         else
             echo "LANG=C.UTF-8" > "${_DESTDIR}"/etc/locale.conf
             echo "LC_COLLATE=C" >> "${_DESTDIR}"/etc/locale.conf
-            read -r -t 2
+            sleep 2
         fi
     fi
 }
@@ -178,7 +178,7 @@ _auto_set_locale() {
     for i in $(rg -o "^LANG=(.*)\..*" -r '$1' "${_DESTDIR}"/etc/locale.conf); do
         sd "^#${i}" "${i}" "${_DESTDIR}"/etc/locale.gen
     done
-    read -r -t 2
+    sleep 2
 }
 
 _auto_windowkeys() {
@@ -199,7 +199,7 @@ _auto_bash(){
         ! rg -qw 'custom-bash-options.sh' "${_DESTDIR}/root/.bashrc" &&\
             echo ". /etc/profile.d/custom-bash-options.sh" >> "${_DESTDIR}/root/.bashrc"
         cp /etc/profile.d/custom-bash-options.sh "${_DESTDIR}"/etc/profile.d/
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -246,7 +246,7 @@ _auto_mkinitcpio() {
         sd " 'fallback'" '' "${_DESTDIR}"/etc/mkinitcpio.d/*.preset
         # remove fallback initramfs
         [[ -e "${_DESTDIR}/boot/initramfs-linux-fallback.img" ]] && rm -f "${_DESTDIR}/boot/initramfs-linux-fallback.img"
-        read -r -t 2
+        sleep 2
         _AUTO_MKINITCPIO=1
         _run_mkinitcpio | _dialog --title " Logging to ${_VC} | ${_LOG} " --gauge "Rebuilding initramfs on installed system..." 6 75 0
         _mkinitcpio_error
diff --git a/usr/lib/archboot/installer/base.sh b/usr/lib/archboot/installer/base.sh
index 4daaad53f..972044f12 100644
--- a/usr/lib/archboot/installer/base.sh
+++ b/usr/lib/archboot/installer/base.sh
@@ -39,7 +39,7 @@ _geteditor() {
                     _dialog --no-mouse --infobox "Enable nano's syntax highlighting on installed system..." 3 70
                     rg -q '^include' "${_DESTDIR}/etc/nanorc" || \
                         echo "include \"/usr/share/nano/*.nanorc\"" >> "${_DESTDIR}/etc/nanorc"
-                    read -r -t 2
+                    sleep 2
                 fi
                 ;;
             "NEOVIM") _EDITOR="nvim"
@@ -231,7 +231,7 @@ _mainmenu() {
                      exit 0 ;;
                 "2") _COUNT=0
                      while true; do
-                         read -r -t 1
+                         sleep 1
                          _COUNT=$((_COUNT+1))
                          # abort after 10 seconds
                          _progress "$((_COUNT*10))" "Rebooting in $((10-_COUNT)) second(s). Don't forget to remove the boot medium!"
@@ -241,7 +241,7 @@ _mainmenu() {
                      reboot ;;
                 "3") _COUNT=0
                      while true; do
-                         read -r -t 1
+                         sleep 1
                          _COUNT=$((_COUNT+1))
                          # abort after 10 seconds
                          _progress "$((_COUNT*10))" "Powering off in $((10-_COUNT)) second(s). Don't forget to remove the boot medium!"
diff --git a/usr/lib/archboot/installer/blockdevices.sh b/usr/lib/archboot/installer/blockdevices.sh
index 0adb1b22c..88a1baa3f 100644
--- a/usr/lib/archboot/installer/blockdevices.sh
+++ b/usr/lib/archboot/installer/blockdevices.sh
@@ -284,7 +284,7 @@ _umountall()
         swapoff -a &>"${_NO_LOG}"
         umount -R "${_DESTDIR}"
         _dialog --no-mouse --infobox "Disabled swapspace,\nunmounted already mounted disk devices in ${_DESTDIR}..." 4 70
-        read -r -t 3
+        sleep 3
     fi
 }
 
@@ -301,7 +301,7 @@ _stopmd()
                 mdadm --manage --stop "/dev/${dev}" &>"${_LOG}"
             done
             _dialog --no-mouse --infobox "Removing software raid device(s) done." 3 50
-            read -r -t 3
+            sleep 3
         fi
     fi
     _DISABLEMDSB=""
@@ -316,7 +316,7 @@ _stopmd()
             _clean_disk "${dev}"
         done
         _dialog --no-mouse --infobox "Removing superblock(s) on software raid devices done." 3 60
-        read -r -t 3
+        sleep 3
     fi
 }
 
@@ -345,7 +345,7 @@ _stoplvm()
             pvremove -f "${dev}" 2>"${_NO_LOG}" >"${_LOG}"
         done
         _dialog --no-mouse --infobox "Removing logical volume(s), logical group(s)\nand physical volume(s) done." 3 60
-        read -r -t 3
+        sleep 3
     fi
 }
 
@@ -369,7 +369,7 @@ _stopluks()
             wipefs -a "${_LUKS_REAL_DEV}" &>"${_NO_LOG}"
         done
         _dialog --no-mouse --infobox "Removing luks encrypted device(s) done." 3 50
-        read -r -t 3
+        sleep 3
     fi
     _DISABLELUKS=""
     _DETECTED_LUKS=""
@@ -384,7 +384,7 @@ _stopluks()
            wipefs -a "${dev}" &>"${_NO_LOG}"
         done
         _dialog --no-mouse --infobox "Removing not running luks encrypted device(s) done." 3 60
-        read -r -t 3
+        sleep 3
     fi
     [[ -e /tmp/.crypttab ]] && rm /tmp/.crypttab
 }
@@ -498,10 +498,10 @@ _createmd()
     #shellcheck disable=SC2086
     if mdadm --create ${_RAIDDEV} ${_RAIDOPTIONS} ${_DEVS} &>"${_LOG}"; then
         _dialog --no-mouse --infobox "${_RAIDDEV} created successfully." 3 50
-        read -r -t 3
+        sleep 3
     else
         _dialog --title " ERROR " --no-mouse --infobox "Creating ${_RAIDDEV} failed." 3 60
-        read -r -t 5
+        sleep 5
         return 1
     fi
     if [[ -n "${_RAID_PARTITION}" ]]; then
@@ -573,10 +573,10 @@ _createpv()
     #shellcheck disable=SC2086
     if pvcreate -y ${_DEV} &>"${_LOG}"; then
         _dialog --no-mouse --infobox "Creating physical volume on ${_DEV} was successful." 3 75
-        read -r -t 3
+        sleep 3
     else
         _dialog --title " ERROR " --no-mouse --infobox "Creating physical volume on ${_DEV} failed." 3 60
-        read -r -t 5
+        sleep 5
         return 1
     fi
     # run udevadm to get values exported
@@ -657,7 +657,7 @@ _createvg()
     #shellcheck disable=SC2086
     if vgcreate ${_VGDEV} ${_PV} &>"${_LOG}"; then
         _dialog --no-mouse --infobox "Creating Volume Group ${_VGDEV} was successful." 3 60
-        read -r -t 3
+        sleep 3
     else
         _dialog --msgbox "Error while creating Volume Group ${_VGDEV} (see ${_LOG} for details)." 0 0
         return 1
@@ -725,7 +725,7 @@ _createlv()
         #shellcheck disable=SC2086
         if lvcreate ${_LV_EXTRA} -l +100%FREE ${_LV} -n ${_LVDEV} &>"${_LOG}"; then
             _dialog --no-mouse --infobox "Creating Logical Volume ${_LVDEV} was successful." 3 60
-            read -r -t 3
+            sleep 3
         else
             _dialog --msgbox "Error while creating Logical Volume ${_LVDEV} (see ${_LOG} for details)." 0 0
             return 1
@@ -734,7 +734,7 @@ _createlv()
         #shellcheck disable=SC2086
         if lvcreate ${_LV_EXTRA} -L ${_LV_SIZE} ${_LV} -n ${_LVDEV} &>"${_LOG}"; then
             _dialog --no-mouse --infobox "Creating Logical Volume ${_LVDEV} was successful." 3 60
-            read -r -t 3
+            sleep 3
         else
             _dialog --msgbox "Error while creating Logical Volume ${_LVDEV} (see ${_LOG} for details)." 0 0
             return 1
@@ -773,7 +773,7 @@ _enter_luks_passphrase () {
             break
         else
              _dialog --no-mouse --infobox "Passphrases didn't match, please enter again." 0 0
-             read -r -t 3
+             sleep 3
             _LUKSPASS=""
             _LUKSPASS2=""
         fi
@@ -785,7 +785,7 @@ _opening_luks() {
     while true; do
         cryptsetup luksOpen "${_DEV}" "${_LUKSDEV}" <"${_LUKSPASSPHRASE}" >"${_LOG}" && break
         _dialog --no-mouse --infobox "Error: Passphrase didn't match, please enter again" 0 0
-        read -r -t 5
+        sleep 5
         _enter_luks_passphrase || return 1
     done
     if _dialog --yesno "Would you like to save the passphrase of luks device in /etc/$(basename "${_LUKSPASSPHRASE}")?\nName:${_LUKSDEV}" 0 0; then
diff --git a/usr/lib/archboot/installer/bootloader_grub.sh b/usr/lib/archboot/installer/bootloader_grub.sh
index 20c3d45cf..ebf2e2748 100644
--- a/usr/lib/archboot/installer/bootloader_grub.sh
+++ b/usr/lib/archboot/installer/bootloader_grub.sh
@@ -253,7 +253,7 @@ _setup_grub_bios() {
     _grub_install_bios &
     _progress_wait "11" "99" "Setting up GRUB(2) BIOS..." "0.15"
     _progress "100" "Setting up GRUB(2) BIOS completed."
-    read -r -t 2
+    sleep 2
 }
 
 _grub_bios() {
@@ -325,7 +325,7 @@ _grub_bios() {
         _grub_config || return 1
         _pacman_hook_grub_bios
         _dialog --title " Success " --no-mouse --infobox "GRUB(2) BIOS has been installed successfully." 3 55
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
     else
         _dialog --msgbox "Error installing GRUB(2) BIOS.\nCheck /tmp/grub_bios_install.log for more info.\n\nYou probably need to install it manually by chrooting into ${_DESTDIR}.\nDon't forget to bind mount /dev and /proc into ${_DESTDIR} before chrooting." 0 0
@@ -356,13 +356,13 @@ _grub_install_uefi_sb() {
 _setup_grub_uefi() {
     if [[ -n "${_UEFI_SECURE_BOOT}" ]]; then
         _progress "50" "Installing fedora's shim and mokmanager..."
-        read -r -t 2
+        sleep 2
         # install fedora shim
         [[ -d  ${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT ]] || mkdir -p "${_DESTDIR}"/"${_UEFISYS_MP}"/EFI/BOOT
         cp -f /usr/share/archboot/bootloader/shim"${_SPEC_UEFI_ARCH}".efi "${_DESTDIR}"/"${_UEFISYS_MP}"/EFI/BOOT/BOOT"${_UEFI_ARCH}".EFI
         cp -f /usr/share/archboot/bootloader/mm"${_SPEC_UEFI_ARCH}".efi "${_DESTDIR}"/"${_UEFISYS_MP}"/EFI/BOOT/
         _progress "100" "Installing fedora's shim and mokmanager completed."
-        read -r -t 2
+        sleep 2
     else
         ## Install GRUB
         _progress "10" "Setting up GRUB(2) UEFI..."
@@ -372,7 +372,7 @@ _setup_grub_uefi() {
         _progress_wait "11" "99" "Setting up GRUB(2) UEFI..." "0.1"
         _chroot_umount
         _progress "100" "Setting up GRUB(2) UEFI completed."
-        read -r -t 2
+        sleep 2
     fi
     _GRUB_UEFI=1
 }
@@ -387,7 +387,7 @@ _setup_grub_uefi_sb() {
         _grub_install_uefi_sb &
         _progress_wait "11" "99" "Setting up GRUB(2) UEFI Secure Boot..." "0.1"
         _progress "100" "Setting up GRUB(2) UEFI Secure Boot completed."
-        read -r -t 2
+        sleep 2
     fi
 }
 
@@ -412,7 +412,7 @@ _grub_uefi() {
         rm -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
         cp -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/grub/grub${_SPEC_UEFI_ARCH}.efi" "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
         _dialog --title " Success " --no-mouse --infobox "GRUB(2) for ${_UEFI_ARCH} UEFI has been installed successfully." 3 60
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
     elif [[ -e "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/grub${_SPEC_UEFI_ARCH}.efi" && -n "${_UEFI_SECURE_BOOT}" ]]; then
         _secureboot_keys || return 1
@@ -423,7 +423,7 @@ _grub_uefi() {
         _BOOTMGR_LOADER_PATH="/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
         _uefi_bootmgr_setup
         _dialog --title " Success " --no-mouse --infobox "SHIM and GRUB(2) Secure Boot for ${_UEFI_ARCH} has been installed successfully." 3 75
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
     else
         _dialog --msgbox "Error installing GRUB(2) for ${_UEFI_ARCH} UEFI.\nCheck /tmp/grub_uefi_${_UEFI_ARCH}_install.log for more info.\n\nYou probably need to install it manually by chrooting into ${_DESTDIR}.\nDon't forget to bind mount /dev, /sys and /proc into ${_DESTDIR} before chrooting." 0 0
diff --git a/usr/lib/archboot/installer/bootloader_limine.sh b/usr/lib/archboot/installer/bootloader_limine.sh
index 1882098bd..7503a918b 100644
--- a/usr/lib/archboot/installer/bootloader_limine.sh
+++ b/usr/lib/archboot/installer/bootloader_limine.sh
@@ -47,7 +47,7 @@ _limine_bios() {
     if chroot "${_DESTDIR}" limine bios-install "${_PARENT_BOOTDEV}" &>"${_LOG}"; then
         _pacman_hook_limine_bios
         _dialog --title " Success " --no-mouse --infobox "LIMINE BIOS has been setup successfully." 3 50
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
 
     else
@@ -70,10 +70,10 @@ _limine_uefi() {
         mkdir -p "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT"
         rm -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
         cp -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/LIMINE${_UEFI_ARCH}.EFI" "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
-        read -r -t 2
+        sleep 2
         _pacman_hook_limine_uefi
         _dialog --title " Success " --no-mouse --infobox "LIMINE has been setup successfully." 3 50
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
 
     else
diff --git a/usr/lib/archboot/installer/bootloader_pacman_hooks.sh b/usr/lib/archboot/installer/bootloader_pacman_hooks.sh
index f02c4b787..f59fa01a3 100644
--- a/usr/lib/archboot/installer/bootloader_pacman_hooks.sh
+++ b/usr/lib/archboot/installer/bootloader_pacman_hooks.sh
@@ -23,7 +23,7 @@ When = PostTransaction
 Exec = /usr/bin/systemctl restart systemd-boot-update.service
 EOF
     _dialog --title " Automatic SYSTEMD-BOOT Update " --no-mouse --infobox "Automatic SYSTEMD-BOOT update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_limine_bios() {
@@ -36,7 +36,7 @@ When = PostTransaction
 Exec = /usr/bin/sh -c "/usr/bin/cp /usr/share/limine/limine-bios.sys /boot/; /usr/bin/limine bios-install '${_PARENT_BOOTDEV}'"
 EOF
     _dialog --title " Automatic LIMINE BIOS Update " --no-mouse --infobox "Automatic LIMINE BIOS update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_limine_uefi() {
@@ -50,7 +50,7 @@ Exec = /usr/bin/sh -c "/usr/bin/cp /usr/share/limine/BOOT${_UEFI_ARCH}.EFI /${_U
 /usr/bin/cp /usr/share/limine/BOOT${_UEFI_ARCH}.EFI /${_UEFISYS_MP}/EFI/BOOT/LIMINE${_UEFI_ARCH}.EFI"
 EOF
     _dialog --title " Automatic LIMINE Update " --no-mouse --infobox "Automatic LIMINE update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_refind() {
@@ -63,7 +63,7 @@ When = PostTransaction
 Exec = /usr/bin/sh -c "/usr/bin/cp /usr/share/refind/refind_${_SPEC_UEFI_ARCH}.efi /${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI;/usr/bin/refind-install"
 EOF
     _dialog --title " Automatic rEFInd Update " --no-mouse --infobox "Automatic rEFInd update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_grub_bios() {
@@ -76,7 +76,7 @@ When = PostTransaction
 Exec = /usr/bin/sh -c "grub-install --directory='/usr/lib/grub/i386-pc' --target='i386-pc' --boot-directory='/boot' --recheck '${_BOOTDEV}'"
 EOF
     _dialog --title " Automatic GRUB Update " --no-mouse --infobox "Automatic GRUB BIOS update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_grub_uefi() {
@@ -89,7 +89,7 @@ When = PostTransaction
 Exec = /usr/bin/sh -c "grub-install --directory='/usr/lib/grub/${_GRUB_ARCH}-efi' --target='${_GRUB_ARCH}-efi' --efi-directory='/${_UEFISYS_MP}' --bootloader-id='GRUB' --recheck"
 EOF
     _dialog --title " Automatic GRUB Update " --no-mouse --infobox "Automatic GRUB update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_hook_grub_sb() {
@@ -102,7 +102,7 @@ When = PostTransaction
 Exec = /usr/bin/sh -c "/usr/bin/grub-mkstandalone -d '/usr/lib/grub/${_GRUB_ARCH}-efi' -O '${_GRUB_ARCH}-efi' --sbat=/usr/share/grub/sbat.csv --fonts='ter-u16n' --locales='en@quot' --themes='' -o '/${_GRUB_PREFIX_DIR}/grub${_SPEC_UEFI_ARCH}.efi' 'boot/grub/grub.cfg=/${_GRUB_PREFIX_DIR}/${_GRUB_CFG}';/usr/bin/sbsign --key '/${_KEYDIR}/MOK/MOK.key' --cert '/${_KEYDIR}/MOK/MOK.crt' --output '/${_UEFI_BOOTLOADER_DIR}/grub${_SPEC_UEFI_ARCH}.efi' '/${_UEFI_BOOTLOADER_DIR}/grub${_SPEC_UEFI_ARCH}.efi'"
 EOF
     _dialog --title " Automatic GRUB UEFI SB Update " --no-mouse --infobox "Automatic GRUB UEFI SB update has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
 
 _pacman_sign() {
@@ -118,5 +118,5 @@ Depends = findutils
 Depends = grep
 EOF
     _dialog --title " Automatic Signing " --no-mouse --infobox "Automatic signing has been enabled successfully:\n\n${_HOOKNAME}" 5 70
-    read -r -t 3
+    sleep 3
 }
diff --git a/usr/lib/archboot/installer/bootloader_refind.sh b/usr/lib/archboot/installer/bootloader_refind.sh
index 83fc3095b..842fd671a 100644
--- a/usr/lib/archboot/installer/bootloader_refind.sh
+++ b/usr/lib/archboot/installer/bootloader_refind.sh
@@ -32,14 +32,14 @@ CONFEOF
         rm -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
         rm -f "${_DESTDIR}"/boot/refind_linux.conf
         cp -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/refind/refind_${_SPEC_UEFI_ARCH}.efi" "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
-        read -r -t 2
+        sleep 2
         _dialog --msgbox "You will now be put into the editor to edit:\nrefind.conf\n\nAfter you save your changes, exit the editor." 8 50
         _geteditor || return 1
         "${_EDITOR}" "${_REFIND_CONFIG}"
         cp -f "${_REFIND_CONFIG}" "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/"
         _pacman_hook_refind
         _dialog --title " Success " --no-mouse --infobox "rEFInd has been setup successfully." 3 50
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
     else
         _dialog --title " ERROR " --msgbox "Setting up rEFInd failed." 5 40
diff --git a/usr/lib/archboot/installer/bootloader_sb.sh b/usr/lib/archboot/installer/bootloader_sb.sh
index 587a3c329..5f44ee411 100644
--- a/usr/lib/archboot/installer/bootloader_sb.sh
+++ b/usr/lib/archboot/installer/bootloader_sb.sh
@@ -18,10 +18,10 @@ _secureboot_keys() {
         done
         secureboot-keys.sh -name="${_CN}" "${_DESTDIR}/${_KEYDIR}" &>"${_LOG}" || return 1
          _dialog --title " Setup Keys " --no-mouse --infobox "Common name(CN) ${_CN}\nused for your keys in ${_DESTDIR}/${_KEYDIR}" 4 60
-         read -r -t 3
+         sleep 3
     else
          _dialog --title " Setup Keys " --no-mouse --infobox "-Directory ${_DESTDIR}/${_KEYDIR} exists\n-assuming keys are already created\n-trying to use existing keys now" 5 50
-         read -r -t 3
+         sleep 3
     fi
 }
 
@@ -41,15 +41,15 @@ _mok_sign () {
             _MOK_PW=/tmp/.password
         else
             _dialog --title " ERROR " --no-mouse --infobox "Password didn't match or was empty, please enter again." 6 65
-            read -r -t 3
+            sleep 3
         fi
     done
     mokutil -i "${_DESTDIR}"/"${_KEYDIR}"/MOK/MOK.cer < ${_MOK_PW} >"${_LOG}"
     rm /tmp/.password
     _dialog --title " Machine Owner Key " --no-mouse --infobox "Machine Owner Key has been installed successfully." 3 70
-    read -r -t 3
+    sleep 3
     ${_NSPAWN} sbsign --key /"${_KEYDIR}"/MOK/MOK.key --cert /"${_KEYDIR}"/MOK/MOK.crt --output /boot/"${_VMLINUZ}" /boot/"${_VMLINUZ}" &>"${_LOG}"
     ${_NSPAWN} sbsign --key /"${_KEYDIR}"/MOK/MOK.key --cert /"${_KEYDIR}"/MOK/MOK.crt --output "${_UEFI_BOOTLOADER_DIR}"/grub"${_SPEC_UEFI_ARCH}".efi "${_UEFI_BOOTLOADER_DIR}"/grub"${_SPEC_UEFI_ARCH}".efi &>"${_LOG}"
     _dialog --title " Kernel And Bootloader Signing " --no-mouse --infobox "/boot/${_VMLINUZ} and ${_UEFI_BOOTLOADER_DIR}/grub${_SPEC_UEFI_ARCH}.efi\n\nhave been signed successfully." 5 60
-    read -r -t 3
+    sleep 3
 }
diff --git a/usr/lib/archboot/installer/bootloader_systemd_bootd.sh b/usr/lib/archboot/installer/bootloader_systemd_bootd.sh
index c210920a0..cbaec9696 100644
--- a/usr/lib/archboot/installer/bootloader_systemd_bootd.sh
+++ b/usr/lib/archboot/installer/bootloader_systemd_bootd.sh
@@ -30,7 +30,7 @@ BOOTDEOF
         "${_EDITOR}" "${_DESTDIR}/${_LOADER_CFG}"
         _pacman_hook_systemd_bootd
         _dialog --title " Success " --no-mouse --infobox "SYSTEMD-BOOT has been setup successfully." 3 50
-        read -r -t 3
+        sleep 3
         _S_BOOTLOADER=1
     else
         _dialog --msgbox "Error installing SYSTEMD-BOOT." 0 0
diff --git a/usr/lib/archboot/installer/bootloader_systemd_services.sh b/usr/lib/archboot/installer/bootloader_systemd_services.sh
index 976695922..9aa180113 100644
--- a/usr/lib/archboot/installer/bootloader_systemd_services.sh
+++ b/usr/lib/archboot/installer/bootloader_systemd_services.sh
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 # created by Tobias Powalowski <tpowa@archlinux.org>
 _uki_autobuild() {
-    read -r -t 2
+    sleep 2
     _progress "50" "Enable automatic UKI creation on installed system..."
     cat << CONFEOF > "${_DESTDIR}/etc/systemd/system/run_ukify.path"
 [Unit]
diff --git a/usr/lib/archboot/installer/bootloader_uboot.sh b/usr/lib/archboot/installer/bootloader_uboot.sh
index 72f7a2770..e41398860 100644
--- a/usr/lib/archboot/installer/bootloader_uboot.sh
+++ b/usr/lib/archboot/installer/bootloader_uboot.sh
@@ -23,5 +23,5 @@ label linux
     append ${_KERNEL_PARAMS_COMMON_MOD}
 EOF
     _dialog --no-mouse --infobox "UBOOT has been installed successfully." 3 55
-    read -r -t 3
+    sleep 3
 }
diff --git a/usr/lib/archboot/installer/bootloader_uki.sh b/usr/lib/archboot/installer/bootloader_uki.sh
index ae9dbd1f3..330308614 100644
--- a/usr/lib/archboot/installer/bootloader_uki.sh
+++ b/usr/lib/archboot/installer/bootloader_uki.sh
@@ -29,9 +29,9 @@ _uki_install() {
     mkdir -p "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT"
     rm -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
     cp -f "${_DESTDIR}/${_UEFISYS_MP}/EFI/Linux/archlinux-linux.efi" "${_DESTDIR}/${_UEFISYS_MP}/EFI/BOOT/BOOT${_UEFI_ARCH}.EFI"
-    read -r -t 2
+    sleep 2
     _progress "100" "Unified Kernel Image has been setup successfully."
-    read -r -t 2
+    sleep 2
     _S_BOOTLOADER=1
 }
 
@@ -50,6 +50,6 @@ _uki_uefi() {
         _uki_install | _dialog --title " Logging to ${_VC} | ${_LOG} " --gauge "Setting up Unified Kernel Image..." 6 75 0
     else
         _dialog --title " ERROR " --no-mouse --infobox "Setting up Unified Kernel Image failed!" 3 60
-        read -r -t 3
+        sleep 3
     fi
 }
diff --git a/usr/lib/archboot/installer/btrfs.sh b/usr/lib/archboot/installer/btrfs.sh
index f587aebab..50e51fd38 100644
--- a/usr/lib/archboot/installer/btrfs.sh
+++ b/usr/lib/archboot/installer/btrfs.sh
@@ -197,7 +197,7 @@ _check_btrfs_subvolume(){
         for i in $(btrfs subvolume list "${_BTRFSMP}" | cut -d ' ' -f 9); do
             if echo "${i}" | rg -q "${_BTRFS_SUBVOLUME}"; then
                 _dialog --title " ERROR " --no-mouse --infobox "You have defined 2 identical SUBVOLUMES! Please enter another name." 3 75
-                read -r -t 3
+                sleep 3
                 _BTRFS_SUBVOLUME=""
             fi
         done
@@ -207,7 +207,7 @@ _check_btrfs_subvolume(){
         _subvolumes_in_use
         if echo "${_SUBVOLUME_IN_USE}" | rg -q "${_BTRFS_SUBVOLUME}"; then
             _dialog --title " ERROR " --no-mouse --infobox "You have defined 2 identical SUBVOLUMES! Please enter another name." 3 75
-            read -r -t 3
+            sleep 3
             _BTRFS_SUBVOLUME=""
         fi
     fi
@@ -243,7 +243,7 @@ _choose_btrfs_subvolume () {
     else
         if [[ -n "${_SUBVOLUMES_DETECTED}" ]]; then
             _dialog --title " ERROR " --no-mouse --infobox "All subvolumes of the device are already in use.\nSwitching to create a new one now." 4 60
-            read -r -t 5
+            sleep 5
             _prepare_btrfs_subvolume || return 1
         fi
     fi
diff --git a/usr/lib/archboot/installer/configuration.sh b/usr/lib/archboot/installer/configuration.sh
index a0c40b8f9..ed169cf81 100644
--- a/usr/lib/archboot/installer/configuration.sh
+++ b/usr/lib/archboot/installer/configuration.sh
@@ -21,10 +21,10 @@ _run_mkinitcpio() {
     _progress_wait "0" "99" "Rebuilding initramfs on installed system..." "0.1"
     if [[ -e "/tmp/.mkinitcpio-success" ]]; then
         _progress "100" "Rebuilding initramfs complete." 6 75
-        read -r -t 2
+        sleep 2
     else
         _progress "100" "Rebuilding initramfs failed." 6 75
-        read -r -t 2
+        sleep 2
     fi
     _chroot_umount
 }
@@ -42,7 +42,7 @@ _run_locale_gen() {
     _locale_gen &
     _progress_wait "0" "99" "Rebuilding glibc locales on installed system..." "0.05"
     _progress "100" "Rebuilding glibc locales on installed system complete." 6 75
-    read -r -t 2
+    sleep 2
 }
 
 _set_mkinitcpio() {
@@ -56,7 +56,7 @@ _check_root_password() {
     # check if empty password is set
     if passwd -R "${_DESTDIR}" -S root | rg -q ' NP '; then
         _dialog --title " Root Account " --no-mouse --infobox "Setup detected no password set for root user.\nPlease set new password now." 4 50
-        read -r -t 3
+        sleep 3
         if _prepare_password Root; then
             _set_password
         else
@@ -94,7 +94,7 @@ _prepare_password() {
             break
         else
             _dialog --title " ERROR " --no-mouse --infobox "Password didn't match, please enter again." 3 50
-            read -r -t 3
+            sleep 3
         fi
     done
 }
@@ -103,7 +103,7 @@ _set_password() {
     passwd -R "${_DESTDIR}" "${_USER}" < /tmp/.password &>"${_NO_LOG}"
     rm /tmp/.password
     _dialog --title " Success " --no-mouse --infobox "New password set for ${_USER}." 3 50
-    read -r -t 2
+    sleep 2
 }
 
 _set_user() {
@@ -160,7 +160,7 @@ _user_management() {
                         usermod -R "${_DESTDIR}" -s "/usr/bin/${_SHELL}" "${i}" &>"${_LOG}"
                     done
                     _dialog --title " Success " --no-mouse --infobox "Default shell set to ${_SHELL}." 3 50
-                    read -r -t 3
+                    sleep 3
                     _NEXTITEM=2
                 else
                     _NEXTITEM=1
@@ -169,7 +169,7 @@ _user_management() {
                      _set_user || break
                      if rg -q "^${_USER}:" "${_DESTDIR}"/etc/passwd; then
                          _dialog --title " ERROR " --no-mouse --infobox "Username already exists! Please choose an other one." 3 60
-                         read -r -t 3
+                         sleep 3
                      else
                          _ADMIN_ATTR=""
                          if _dialog --defaultno --yesno "Enable ${_USER} as Administrator and part of wheel group?" 5 60; then
@@ -181,12 +181,12 @@ _user_management() {
                          if useradd -R "${_DESTDIR}" ${_ADMIN_ATTR} -c "${_FN}" -m "${_USER}" &>"${_LOG}"; then
                             _set_password
                             _dialog --title " Success " --no-mouse --infobox "User Account ${_USER} created succesfully." 3 50
-                            read -r -t 2
+                            sleep 2
                             _NEXTITEM=2
                             break
                          else
                              _dialog --title " ERROR " --no-mouse --infobox "User creation failed! Please try again." 3 50
-                             read -r -t 3
+                             sleep 3
                          fi
                      fi
                  done ;;
@@ -232,11 +232,11 @@ _user_management() {
                                      if [[ -n "${_ADMIN_ATTR}" ]]; then
                                          usermod -R "${_DESTDIR}" -rG wheel "${_USER}"
                                          _dialog --title " Success " --no-mouse --infobox "User ${_USER} removed as Administrator and removed from wheel group." 3 70
-                                         read -r -t 2
+                                         sleep 2
                                      else
                                          usermod -R "${_DESTDIR}" -aG wheel "${_USER}"
                                          _dialog --title " Success " --no-mouse --infobox "User ${_USER} switched to Administrator and added to wheel group." 3 70
-                                         read -r -t 2
+                                         sleep 2
                                      fi ;;
                                 "2") _NEXTITEM=2
                                      if _prepare_password User; then
@@ -246,14 +246,14 @@ _user_management() {
                                      if _set_comment; then
                                          usermod -R "${_DESTDIR}" -c "${_FN}" "${_USER}"
                                          _dialog --title " Success " --no-mouse --infobox "New comment set for ${_USER}." 3 50
-                                         read -r -t 2
+                                         sleep 2
                                      fi ;;
                                 "4") if _NEXTITEM=4
                                         _dialog --defaultno --yesno \
                                             "${_USER} will be COMPLETELY ERASED!\nALL USER DATA OF ${_USER} WILL BE LOST.\n\nAre you absolutely sure?" 0 0 && \
                                         userdel -R "${_DESTDIR}" -r "${_USER}" &>"${_LOG}"; then
                                         _dialog --title " Success " --no-mouse --infobox "User ${_USER} deleted succesfully." 3 50
-                                        read -r -t 3
+                                        sleep 3
                                         break
                                      fi ;;
                                  *) break ;;
diff --git a/usr/lib/archboot/installer/mountpoints.sh b/usr/lib/archboot/installer/mountpoints.sh
index 3ffbea11b..b660a9d51 100644
--- a/usr/lib/archboot/installer/mountpoints.sh
+++ b/usr/lib/archboot/installer/mountpoints.sh
@@ -172,11 +172,11 @@ _run_mkfs() {
         else
             _mkfs "${_DEV}" "${_FSTYPE}" "${_DESTDIR}" "${_DOMKFS}" "${_MP}" "${_LABEL_NAME}" "${_FS_OPTIONS}" || return 1
         fi
-        read -r -t 1
+        sleep 1
         _COUNT=$((_COUNT+_PROGRESS_COUNT))
     done < /tmp/.parts
     _progress "100" "Mountpoints finished successfully."
-    read -r -t 2
+    sleep 2
 }
 
 _create_filesystem() {
@@ -194,7 +194,7 @@ _create_filesystem() {
             _LABEL_NAME=$(cat "${_ANSWER}")
             if rg "|${_LABEL_NAME}$" /tmp/.parts; then
                 _dialog --title " ERROR " --no-mouse --infobox "You have defined 2 identical LABEL names! Please enter another name." 3 60
-                read -r -t 5
+                sleep 5
                 _LABEL_NAME=""
             fi
         done
@@ -309,7 +309,7 @@ _mountpoints() {
                             if ! [[ "${_DEV}" == "> NONE" || "${_DEV}" == "> FILE" ]]; then
                                 if ! [[ "${_FSTYPE}" == "swap" ]]; then
                                     _dialog --title " ERROR " --no-mouse --infobox "SWAP PARTITION has not a swap filesystem." 3 60
-                                    read -r -t 5
+                                    sleep 5
                                     _MP_DONE=""
                                 else
                                     _MP_DONE=1
@@ -320,11 +320,11 @@ _mountpoints() {
                         elif [[ -z "${_ROOT_DONE}" ]]; then
                             if [[ "${_FSTYPE}" == "vfat" ]]; then
                                 _dialog --title " ERROR " --no-mouse --infobox "ROOT DEVICE has a vfat filesystem." 3 60
-                                read -r -t 5
+                                sleep 5
                                 _MP_DONE=""
                             elif [[ "${_FSTYPE}" == "swap" ]]; then
                                 _dialog --title " ERROR " --no-mouse --infobox "ROOT DEVICE has a swap filesystem." 3 60
-                                read -r -t 5
+                                sleep 5
                                 _MP_DONE=""
                             else
                                 _MP_DONE=1
@@ -332,7 +332,7 @@ _mountpoints() {
                         elif [[ -z "${_UEFISYSDEV_DONE}" ]]; then
                             if ! [[ "${_FSTYPE}" == "vfat" ]]; then
                                 _dialog --title " ERROR " --no-mouse --infobox "EFI SYSTEM PARTITION has not a vfat filesystem." 3 60
-                                read -r -t 5
+                                sleep 5
                                 _MP_DONE=""
                             else
                                 _MP_DONE=1
@@ -340,7 +340,7 @@ _mountpoints() {
                          elif [[ -n "${_XBOOTLDR}" ]]; then
                             if ! [[ "${_FSTYPE}" == "vfat" ]]; then
                                 _dialog --title " ERROR " --no-mouse --infobox "EXTENDED BOOT LOADER PARTITION has not a vfat filesystem." 3 70
-                                read -r -t 5
+                                sleep 5
                                 _MP_DONE=""
                             else
                                 _MP_DONE=1
@@ -463,7 +463,7 @@ _mkfs() {
             #shellcheck disable=SC2181
             if [[ -f "/tmp/.mp-error" ]]; then
                 _progress "100" "ERROR: Creating swap ${1}"
-                read -r -t 5
+                sleep 5
                 return 1
             fi
         fi
@@ -474,7 +474,7 @@ _mkfs() {
         fi
         if [[ -f "/tmp/.mp-error" ]]; then
             _progress "100" "ERROR: Activating swap ${1}"
-            read -r -t 5
+            sleep 5
             return 1
         fi
     else
@@ -491,16 +491,16 @@ _mkfs() {
             esac
             if [[ -f "/tmp/.mp-error" ]]; then
                 _progress "100" "ERROR: Creating filesystem ${2} on ${1}" 0 0
-                read -r -t 5
+                sleep 5
                 return 1
             fi
-            read -r -t 2
+            sleep 2
         fi
         if [[ "${2}" == "btrfs" && -n "${10}" ]]; then
             _create_btrfs_subvolume
         fi
         _btrfs_scan
-        read -r -t 2
+        sleep 2
         # create our mount directory
         mkdir -p "${3}""${5}"
         # add ssd optimization before mounting
@@ -516,7 +516,7 @@ _mkfs() {
         #shellcheck disable=SC2181
         if [[ -f "/tmp/.mp-error" ]]; then
             _progress "100" "ERROR: Mounting ${3}${5}"
-            read -r -t 5
+            sleep 5
             return 1
         fi
         # create /EFI directory on ESP
@@ -529,7 +529,7 @@ _mkfs() {
         # check if /boot exists on ROOT DEVICE
         if [[ -z "${_CREATE_MOUNTPOINTS}" && "${5}" = "/" && ! -d "${3}${5}/boot" ]]; then
             _progress "100" "ERROR: ROOT DEVICE ${3}${5} does not contain /boot directory."
-            read -r -t 5
+            sleep 5
             _umountall
             : > /tmp/.mp-error
             return 1
@@ -537,7 +537,7 @@ _mkfs() {
         # check on /EFI on /efi mountpoint
         if [[ -z "${_CREATE_MOUNTPOINTS}" && "${5}" = "/efi" && ! -d "${3}${5}/EFI" ]]; then
             _progress "100" "ERROR: EFI SYSTEM PARTITION (ESP) ${3}${5} does not contain /EFI directory."
-            read -r -t 5
+            sleep 5
             _umountall
             : > /tmp/.mp-error
             return 1
@@ -546,7 +546,7 @@ _mkfs() {
         if [[ -z "${_CREATE_MOUNTPOINTS}" && "${5}" = "/boot" && -n "${_UEFI_BOOT}" && ! -d "${3}${5}/EFI" ]]; then
             if ! mountpoint -q "${3}/efi"; then
                 _progress "100" "ERROR: EFI SYSTEM PARTITION (ESP) ${3}${5} does not contain /EFI directory."
-                read -r -t 5
+                sleep 5
                 _umountall
                 : > /tmp/.mp-error
                 return 1
diff --git a/usr/lib/archboot/installer/pacman.sh b/usr/lib/archboot/installer/pacman.sh
index b745d965c..b53570a37 100644
--- a/usr/lib/archboot/installer/pacman.sh
+++ b/usr/lib/archboot/installer/pacman.sh
@@ -20,10 +20,10 @@ _run_pacman(){
     # pacman finished, display scrollable output
     if [[ -e "/tmp/.pacman-success" ]]; then
         _progress "100" "Package installation complete." 6 75
-        read -r -t 2
+        sleep 2
     else
         _progress "100" "Package installation failed." 6 75
-        read -r -t 2
+        sleep 2
     fi
     # ensure the disk is synced
     sync
diff --git a/usr/lib/archboot/installer/quicksetup.sh b/usr/lib/archboot/installer/quicksetup.sh
index 2940e24e2..f33e68976 100644
--- a/usr/lib/archboot/installer/quicksetup.sh
+++ b/usr/lib/archboot/installer/quicksetup.sh
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 # created by Tobias Powalowski <tpowa@archlinux.org>
 _auto_partition() {
-    read -r -t 2
+    sleep 2
     _progress "10" "Cleaning ${_DISK}..."
     _clean_disk "${_DISK}"
     # we assume a /dev/sdX,/dev/vdX or /dev/nvmeXnY format
@@ -56,7 +56,7 @@ _auto_partition() {
         fi
     fi
     _progress "100" "Partitions created successfully."
-    read -r -t 2
+    sleep 2
 }
 
 _auto_create_filesystems() {
@@ -98,7 +98,7 @@ _auto_create_filesystems() {
         else
             _mkfs "${_DEV}" "${_FSTYPE}" "${_DESTDIR}" "${_DOMKFS}" "${_MP}" "${_LABEL_NAME}" "${_FS_OPTIONS}" || return 1
         fi
-        read -r -t 1
+        sleep 1
         # set default subvolume for systemd-gpt-autogenerator
         if [[ "${_FSTYPE}" == "btrfs" ]]; then
             btrfs subvolume set-default "${_DESTDIR}"/"${_MP}" || return 1
@@ -106,7 +106,7 @@ _auto_create_filesystems() {
         _COUNT=$((_COUNT+_PROGRESS_COUNT))
     done
     _progress "100" "Filesystems created successfully."
-    read -r -t 2
+    sleep 2
 }
 _autoprepare() {
     # check on special devices and stop them, else weird things can happen during partitioning!
@@ -178,11 +178,11 @@ _autoprepare() {
                     _UEFISYSDEV_SIZE="$(cat "${_ANSWER}")"
                     if [[ -z "${_UEFISYSDEV_SIZE}" ]]; then
                         _dialog --title " ERROR " --no-mouse --infobox "You have entered a invalid size, please enter again." 3 60
-                        read -r -t 5
+                        sleep 5
                     else
                         if [[ "${_UEFISYSDEV_SIZE}" -ge "${_DISK_SIZE}" || "${_UEFISYSDEV_SIZE}" -lt "260" || "${_UEFISYSDEV_SIZE}" == "${_DISK_SIZE}" ]]; then
                             _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
-                            read -r -t 5
+                            sleep 5
                         else
                             _BOOTDEV_SET=1
                             _UEFISYSDEV_SET=1
@@ -197,11 +197,11 @@ _autoprepare() {
                     _UEFISYSDEV_SIZE="$(cat "${_ANSWER}")"
                     if [[ -z "${_UEFISYSDEV_SIZE}" ]]; then
                         _dialog --title " ERROR " --no-mouse --infobox "You have entered a invalid size, please enter again." 3 60
-                        read -r -t 5
+                        sleep 5
                     else
                         if [[ "${_UEFISYSDEV_SIZE}" -ge "${_DISK_SIZE}" || "${_UEFISYSDEV_SIZE}" -lt "260" || "${_UEFISYSDEV_SIZE}" == "${_DISK_SIZE}" ]]; then
                             _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
-                            read -r -t 5
+                            sleep 5
                         else
                             _UEFISYSDEV_SET=1
                             _UEFISYSDEV_NUM="$((_DEV_NUM+1))"
@@ -216,7 +216,7 @@ _autoprepare() {
                 _BOOTDEV_SIZE="$(cat "${_ANSWER}")"
                 if [[ -z "${_BOOTDEV_SIZE}" ]]; then
                     _dialog --title " ERROR " --no-mouse --infobox "You have entered a invalid size, please enter again." 3 60
-                    read -r -t 5
+                    sleep 5
                 else
                     if [[ "${_BOOTDEV_SIZE}" -ge "${_DISK_SIZE}" || "${_BOOTDEV_SIZE}" -lt "100" || "${_BOOTDEV_SIZE}" == "${_DISK_SIZE}" ]]; then
                         _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
@@ -234,11 +234,11 @@ _autoprepare() {
                 _BOOTDEV_SIZE="$(cat "${_ANSWER}")"
                 if [[ -z "${_BOOTDEV_SIZE}" ]]; then
                     _dialog --title " ERROR " --no-mouse --infobox "You have entered a invalid size, please enter again." 3 60
-                    read -r -t 5
+                    sleep 5
                 else
                     if [[ "${_BOOTDEV_SIZE}" -ge "${_DISK_SIZE}" || "${_BOOTDEV_SIZE}" -lt "100" || "${_BOOTDEV_SIZE}" == "${_DISK_SIZE}" ]]; then
                         _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
-                        read -r -t 5
+                        sleep 5
                     else
                         _BOOTDEV_SET=1
                         _BOOTDEV_NUM=$((_DEV_NUM+1))
@@ -255,11 +255,11 @@ _autoprepare() {
             _SWAPDEV_SIZE=$(cat "${_ANSWER}")
             if [[ -z "${_SWAPDEV_SIZE}" ]]; then
                 _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
-                read -r -t 5
+                sleep 5
             else
                 if [[ "${_SWAPDEV_SIZE}" -ge "${_DISK_SIZE}" ]]; then
                     _dialog --title " ERROR " --no-mouse --infobox "You have entered a too large size, please enter again." 3 60
-                    read -r -t 5
+                    sleep 5
                 elif [[ "${_SWAPDEV_SIZE}" == "0" ]]; then
                     _SWAPDEV_SET=1
                     _SKIP_SWAP=1
@@ -295,11 +295,11 @@ _autoprepare() {
         else
             if [[ -z "${_ROOTDEV_SIZE}" || "${_ROOTDEV_SIZE}" == 0 || "${_ROOTDEV_SIZE}" -lt "2000" ]]; then
                 _dialog --title " ERROR " --no-mouse --infobox "You have entered an invalid size, please enter again." 3 60
-                read -r -t 5
+                sleep 5
             else
                 if [[ "${_ROOTDEV_SIZE}" -ge "${_DISK_SIZE}" || "$((_DISK_SIZE-_ROOTDEV_SIZE))" -lt "350" ]]; then
                     _dialog --title " ERROR " --no-mouse --infobox "You have entered a too large size, please enter again." 3 60
-                    read -r -t 5
+                    sleep 5
                 else
                     if _dialog --title " Confirmation " --yesno "$((_DISK_SIZE-_ROOTDEV_SIZE))M will be used for your /home completely?" 5 65; then
                         _ROOTDEV_SET=1
@@ -341,6 +341,6 @@ _autoprepare() {
     fi
     _auto_create_filesystems | _dialog --title " Filesystems " --no-mouse --gauge "Creating Filesystems on ${_DISK}..." 6 75 0
     _dialog --title " Success " --no-mouse --infobox "Quick Setup was successful." 3 40
-    read -r -t 3
+    sleep 3
 }
 # vim: set ft=sh ts=4 sw=4 et: