diff --git a/etc/load-modules.sh b/etc/load-modules.sh index 529c3f714..262946d5c 100755 --- a/etc/load-modules.sh +++ b/etc/load-modules.sh @@ -23,6 +23,13 @@ if [ -s /tmp/.ide-blacklist ]; then j="$j $l" done fi +# blacklist framebuffer modules +for x in $(echo /lib/modules/$(uname -r)/kernel/drivers/video/*/*fb*); do + j="$j $(/usr/bin/basename $x .ko)" +done +for x in $(echo /lib/modules/$(uname -r)/kernel/drivers/video/*fb*); do + j="$j $(/usr/bin/basename $x .ko)" +done if [ "${j}" != "" ] ; then for n in ${i}; do diff --git a/etc/openvpn/examples/README b/etc/openvpn/examples/README new file mode 100644 index 000000000..d53ac79a1 --- /dev/null +++ b/etc/openvpn/examples/README @@ -0,0 +1,6 @@ +Sample OpenVPN Configuration Files. + +These files are part of the OpenVPN HOWTO +which is located at: + +http://openvpn.net/howto.html diff --git a/etc/openvpn/examples/client.conf b/etc/openvpn/examples/client.conf new file mode 100644 index 000000000..9dd3a65ae --- /dev/null +++ b/etc/openvpn/examples/client.conf @@ -0,0 +1,123 @@ +############################################## +# Sample client-side OpenVPN 2.0 config file # +# for connecting to multi-client server. # +# # +# This configuration can be used by multiple # +# clients, however each client should have # +# its own cert and key files. # +# # +# On Windows, you might want to rename this # +# file so it has a .ovpn extension # +############################################## + +# Specify that we are a client and that we +# will be pulling certain config file directives +# from the server. +client + +# Use the same setting as you are using on +# the server. +# On most systems, the VPN will not function +# unless you partially or fully disable +# the firewall for the TUN/TAP interface. +;dev tap +dev tun + +# Windows needs the TAP-Win32 adapter name +# from the Network Connections panel +# if you have more than one. On XP SP2, +# you may need to disable the firewall +# for the TAP adapter. +;dev-node MyTap + +# Are we connecting to a TCP or +# UDP server? Use the same setting as +# on the server. +;proto tcp +proto udp + +# The hostname/IP and port of the server. +# You can have multiple remote entries +# to load balance between the servers. +remote my-server-1 1194 +;remote my-server-2 1194 + +# Choose a random host from the remote +# list for load-balancing. Otherwise +# try hosts in the order specified. +;remote-random + +# Keep trying indefinitely to resolve the +# host name of the OpenVPN server. Very useful +# on machines which are not permanently connected +# to the internet such as laptops. +resolv-retry infinite + +# Most clients don't need to bind to +# a specific local port number. +nobind + +# Downgrade privileges after initialization (non-Windows only) +;user nobody +;group nobody + +# Try to preserve some state across restarts. +persist-key +persist-tun + +# If you are connecting through an +# HTTP proxy to reach the actual OpenVPN +# server, put the proxy server/IP and +# port number here. See the man page +# if your proxy server requires +# authentication. +;http-proxy-retry # retry on connection failures +;http-proxy [proxy server] [proxy port #] + +# Wireless networks often produce a lot +# of duplicate packets. Set this flag +# to silence duplicate packet warnings. +;mute-replay-warnings + +# SSL/TLS parms. +# See the server config file for more +# description. It's best to use +# a separate .crt/.key file pair +# for each client. A single ca +# file can be used for all clients. +ca ca.crt +cert client.crt +key client.key + +# Verify server certificate by checking +# that the certicate has the nsCertType +# field set to "server". This is an +# important precaution to protect against +# a potential attack discussed here: +# http://openvpn.net/howto.html#mitm +# +# To use this feature, you will need to generate +# your server certificates with the nsCertType +# field set to "server". The build-key-server +# script in the easy-rsa folder will do this. +;ns-cert-type server + +# If a tls-auth key is used on the server +# then every client must also have the key. +;tls-auth ta.key 1 + +# Select a cryptographic cipher. +# If the cipher option is used on the server +# then you must also specify it here. +;cipher x + +# Enable compression on the VPN link. +# Don't enable this unless it is also +# enabled in the server config file. +comp-lzo + +# Set log file verbosity. +verb 3 + +# Silence repeating messages +;mute 20 diff --git a/etc/openvpn/examples/firewall.sh b/etc/openvpn/examples/firewall.sh new file mode 100755 index 000000000..f0db8063c --- /dev/null +++ b/etc/openvpn/examples/firewall.sh @@ -0,0 +1,108 @@ +#!/bin/bash + +# A Sample OpenVPN-aware firewall. + +# eth0 is connected to the internet. +# eth1 is connected to a private subnet. + +# Change this subnet to correspond to your private +# ethernet subnet. Home will use HOME_NET/24 and +# Office will use OFFICE_NET/24. +PRIVATE=10.0.0.0/24 + +# Loopback address +LOOP=127.0.0.1 + +# Delete old iptables rules +# and temporarily block all traffic. +iptables -P OUTPUT DROP +iptables -P INPUT DROP +iptables -P FORWARD DROP +iptables -F + +# Set default policies +iptables -P OUTPUT ACCEPT +iptables -P INPUT DROP +iptables -P FORWARD DROP + +# Prevent external packets from using loopback addr +iptables -A INPUT -i eth0 -s $LOOP -j DROP +iptables -A FORWARD -i eth0 -s $LOOP -j DROP +iptables -A INPUT -i eth0 -d $LOOP -j DROP +iptables -A FORWARD -i eth0 -d $LOOP -j DROP + +# Anything coming from the Internet should have a real Internet address +iptables -A FORWARD -i eth0 -s 192.168.0.0/16 -j DROP +iptables -A FORWARD -i eth0 -s 172.16.0.0/12 -j DROP +iptables -A FORWARD -i eth0 -s 10.0.0.0/8 -j DROP +iptables -A INPUT -i eth0 -s 192.168.0.0/16 -j DROP +iptables -A INPUT -i eth0 -s 172.16.0.0/12 -j DROP +iptables -A INPUT -i eth0 -s 10.0.0.0/8 -j DROP + +# Block outgoing NetBios (if you have windows machines running +# on the private subnet). This will not affect any NetBios +# traffic that flows over the VPN tunnel, but it will stop +# local windows machines from broadcasting themselves to +# the internet. +iptables -A FORWARD -p tcp --sport 137:139 -o eth0 -j DROP +iptables -A FORWARD -p udp --sport 137:139 -o eth0 -j DROP +iptables -A OUTPUT -p tcp --sport 137:139 -o eth0 -j DROP +iptables -A OUTPUT -p udp --sport 137:139 -o eth0 -j DROP + +# Check source address validity on packets going out to internet +iptables -A FORWARD -s ! $PRIVATE -i eth1 -j DROP + +# Allow local loopback +iptables -A INPUT -s $LOOP -j ACCEPT +iptables -A INPUT -d $LOOP -j ACCEPT + +# Allow incoming pings (can be disabled) +iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT + +# Allow services such as www and ssh (can be disabled) +iptables -A INPUT -p tcp --dport http -j ACCEPT +iptables -A INPUT -p tcp --dport ssh -j ACCEPT + +# Allow incoming OpenVPN packets +# Duplicate the line below for each +# OpenVPN tunnel, changing --dport n +# to match the OpenVPN UDP port. +# +# In OpenVPN, the port number is +# controlled by the --port n option. +# If you put this option in the config +# file, you can remove the leading '--' +# +# If you taking the stateful firewall +# approach (see the OpenVPN HOWTO), +# then comment out the line below. + +iptables -A INPUT -p udp --dport 1194 -j ACCEPT + +# Allow packets from TUN/TAP devices. +# When OpenVPN is run in a secure mode, +# it will authenticate packets prior +# to their arriving on a tun or tap +# interface. Therefore, it is not +# necessary to add any filters here, +# unless you want to restrict the +# type of packets which can flow over +# the tunnel. + +iptables -A INPUT -i tun+ -j ACCEPT +iptables -A FORWARD -i tun+ -j ACCEPT +iptables -A INPUT -i tap+ -j ACCEPT +iptables -A FORWARD -i tap+ -j ACCEPT + +# Allow packets from private subnets +iptables -A INPUT -i eth1 -j ACCEPT +iptables -A FORWARD -i eth1 -j ACCEPT + +# Keep state of connections from local machine and private subnets +iptables -A OUTPUT -m state --state NEW -o eth0 -j ACCEPT +iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT +iptables -A FORWARD -m state --state NEW -o eth0 -j ACCEPT +iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT + +# Masquerade local subnet +iptables -t nat -A POSTROUTING -s $PRIVATE -o eth0 -j MASQUERADE diff --git a/etc/openvpn/examples/home.up b/etc/openvpn/examples/home.up new file mode 100755 index 000000000..9c347cc5a --- /dev/null +++ b/etc/openvpn/examples/home.up @@ -0,0 +1,2 @@ +#!/bin/sh +route add -net 10.0.0.0 netmask 255.255.255.0 gw $5 diff --git a/etc/openvpn/examples/loopback-client b/etc/openvpn/examples/loopback-client new file mode 100644 index 000000000..9db2877f0 --- /dev/null +++ b/etc/openvpn/examples/loopback-client @@ -0,0 +1,25 @@ +# Perform a TLS loopback test -- client side. +# +# This test performs a TLS negotiation once every 10 seconds, +# and will terminate after 2 minutes. +# +# From the root directory of the OpenVPN distribution, +# after openvpn has been built, run: +# +# ./openvpn --config sample-config-files/loopback-client (In one window) +# ./openvpn --config sample-config-files/loopback-server (Simultaneously in another window) + +rport 16000 +lport 16001 +remote localhost +local localhost +dev null +verb 3 +reneg-sec 10 +tls-client +ca sample-keys/tmp-ca.crt +key sample-keys/client.key +cert sample-keys/client.crt +cipher DES-EDE3-CBC +ping 1 +inactive 120 diff --git a/etc/openvpn/examples/loopback-server b/etc/openvpn/examples/loopback-server new file mode 100644 index 000000000..18bbbeb06 --- /dev/null +++ b/etc/openvpn/examples/loopback-server @@ -0,0 +1,26 @@ +# Perform a TLS loopback test -- server side. +# +# This test performs a TLS negotiation once every 10 seconds, +# and will terminate after 2 minutes. +# +# From the root directory of the OpenVPN distribution, +# after openvpn has been built, run: +# +# ./openvpn --config sample-config-files/loopback-client (In one window) +# ./openvpn --config sample-config-files/loopback-server (Simultaneously in another window) + +rport 16001 +lport 16000 +remote localhost +local localhost +dev null +verb 3 +reneg-sec 10 +tls-server +dh sample-keys/dh1024.pem +ca sample-keys/tmp-ca.crt +key sample-keys/server.key +cert sample-keys/server.crt +cipher DES-EDE3-CBC +ping 1 +inactive 120 diff --git a/etc/openvpn/examples/office.up b/etc/openvpn/examples/office.up new file mode 100755 index 000000000..74a71a33f --- /dev/null +++ b/etc/openvpn/examples/office.up @@ -0,0 +1,2 @@ +#!/bin/sh +route add -net 10.0.1.0 netmask 255.255.255.0 gw $5 diff --git a/etc/openvpn/examples/openvpn-shutdown.sh b/etc/openvpn/examples/openvpn-shutdown.sh new file mode 100755 index 000000000..8ed2d1d56 --- /dev/null +++ b/etc/openvpn/examples/openvpn-shutdown.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +# stop all openvpn processes + +killall -TERM openvpn diff --git a/etc/openvpn/examples/openvpn-startup.sh b/etc/openvpn/examples/openvpn-startup.sh new file mode 100755 index 000000000..0ee006bc3 --- /dev/null +++ b/etc/openvpn/examples/openvpn-startup.sh @@ -0,0 +1,34 @@ +#!/bin/sh + +# A sample OpenVPN startup script +# for Linux. + +# openvpn config file directory +dir=/etc/openvpn + +# load the firewall +$dir/firewall.sh + +# load TUN/TAP kernel module +modprobe tun + +# enable IP forwarding +echo 1 > /proc/sys/net/ipv4/ip_forward + +# Invoke openvpn for each VPN tunnel +# in daemon mode. Alternatively, +# you could remove "--daemon" from +# the command line and add "daemon" +# to the config file. +# +# Each tunnel should run on a separate +# UDP port. Use the "port" option +# to control this. Like all of +# OpenVPN's options, you can +# specify "--port 8000" on the command +# line or "port 8000" in the config +# file. + +openvpn --cd $dir --daemon --config vpn1.conf +openvpn --cd $dir --daemon --config vpn2.conf +openvpn --cd $dir --daemon --config vpn2.conf diff --git a/etc/openvpn/examples/server.conf b/etc/openvpn/examples/server.conf new file mode 100644 index 000000000..f80ce8b17 --- /dev/null +++ b/etc/openvpn/examples/server.conf @@ -0,0 +1,291 @@ +################################################# +# Sample OpenVPN 2.0 config file for # +# multi-client server. # +# # +# This file is for the server side # +# of a many-clients <-> one-server # +# OpenVPN configuration. # +# # +# OpenVPN also supports # +# single-machine <-> single-machine # +# configurations (See the Examples page # +# on the web site for more info). # +# # +# This config should work on Windows # +# or Linux/BSD systems. Remember on # +# Windows to quote pathnames and use # +# double backslashes, e.g.: # +# "C:\\Program Files\\OpenVPN\\config\\foo.key" # +# # +# Comments are preceded with '#' or ';' # +################################################# + +# Which local IP address should OpenVPN +# listen on? (optional) +;local a.b.c.d + +# Which TCP/UDP port should OpenVPN listen on? +# If you want to run multiple OpenVPN instances +# on the same machine, use a different port +# number for each one. You will need to +# open up this port on your firewall. +port 1194 + +# TCP or UDP server? +;proto tcp +proto udp + +# "dev tun" will create a routed IP tunnel, +# "dev tap" will create an ethernet tunnel. +# Use "dev tap0" if you are ethernet bridging +# and have precreated a tap0 virtual interface +# and bridged it with your ethernet interface. +# If you want to control access policies +# over the VPN, you must create firewall +# rules for the the TUN/TAP interface. +# On non-Windows systems, you can give +# an explicit unit number, such as tun0. +# On Windows, use "dev-node" for this. +# On most systems, the VPN will not function +# unless you partially or fully disable +# the firewall for the TUN/TAP interface. +;dev tap +dev tun + +# Windows needs the TAP-Win32 adapter name +# from the Network Connections panel if you +# have more than one. On XP SP2 or higher, +# you may need to selectively disable the +# Windows firewall for the TAP adapter. +# Non-Windows systems usually don't need this. +;dev-node MyTap + +# SSL/TLS root certificate (ca), certificate +# (cert), and private key (key). Each client +# and the server must have their own cert and +# key file. The server and all clients will +# use the same ca file. +# +# See the "easy-rsa" directory for a series +# of scripts for generating RSA certificates +# and private keys. Remember to use +# a unique Common Name for the server +# and each of the client certificates. +# +# Any X509 key management system can be used. +# OpenVPN can also use a PKCS #12 formatted key file +# (see "pkcs12" directive in man page). +ca ca.crt +cert server.crt +key server.key # This file should be kept secret + +# Diffie hellman parameters. +# Generate your own with: +# openssl dhparam -out dh1024.pem 1024 +# Substitute 2048 for 1024 if you are using +# 2048 bit keys. +dh dh1024.pem + +# Configure server mode and supply a VPN subnet +# for OpenVPN to draw client addresses from. +# The server will take 10.8.0.1 for itself, +# the rest will be made available to clients. +# Each client will be able to reach the server +# on 10.8.0.1. Comment this line out if you are +# ethernet bridging. See the man page for more info. +server 10.8.0.0 255.255.255.0 + +# Maintain a record of client <-> virtual IP address +# associations in this file. If OpenVPN goes down or +# is restarted, reconnecting clients can be assigned +# the same virtual IP address from the pool that was +# previously assigned. +ifconfig-pool-persist ipp.txt + +# Configure server mode for ethernet bridging. +# You must first use your OS's bridging capability +# to bridge the TAP interface with the ethernet +# NIC interface. Then you must manually set the +# IP/netmask on the bridge interface, here we +# assume 10.8.0.4/255.255.255.0. Finally we +# must set aside an IP range in this subnet +# (start=10.8.0.50 end=10.8.0.100) to allocate +# to connecting clients. Leave this line commented +# out unless you are ethernet bridging. +;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 + +# Push routes to the client to allow it +# to reach other private subnets behind +# the server. Remember that these +# private subnets will also need +# to know to route the OpenVPN client +# address pool (10.8.0.0/255.255.255.0) +# back to the OpenVPN server. +;push "route 192.168.10.0 255.255.255.0" +;push "route 192.168.20.0 255.255.255.0" + +# To assign specific IP addresses to specific +# clients or if a connecting client has a private +# subnet behind it that should also have VPN access, +# use the subdirectory "ccd" for client-specific +# configuration files (see man page for more info). + +# EXAMPLE: Suppose the client +# having the certificate common name "Thelonious" +# also has a small subnet behind his connecting +# machine, such as 192.168.40.128/255.255.255.248. +# First, uncomment out these lines: +;client-config-dir ccd +;route 192.168.40.128 255.255.255.248 +# Then create a file ccd/Thelonious with this line: +# iroute 192.168.40.128 255.255.255.248 +# This will allow Thelonious' private subnet to +# access the VPN. This example will only work +# if you are routing, not bridging, i.e. you are +# using "dev tun" and "server" directives. + +# EXAMPLE: Suppose you want to give +# Thelonious a fixed VPN IP address of 10.9.0.1. +# First uncomment out these lines: +;client-config-dir ccd +;route 10.9.0.0 255.255.255.252 +# Then add this line to ccd/Thelonious: +# ifconfig-push 10.9.0.1 10.9.0.2 + +# Suppose that you want to enable different +# firewall access policies for different groups +# of clients. There are two methods: +# (1) Run multiple OpenVPN daemons, one for each +# group, and firewall the TUN/TAP interface +# for each group/daemon appropriately. +# (2) (Advanced) Create a script to dynamically +# modify the firewall in response to access +# from different clients. See man +# page for more info on learn-address script. +;learn-address ./script + +# If enabled, this directive will configure +# all clients to redirect their default +# network gateway through the VPN, causing +# all IP traffic such as web browsing and +# and DNS lookups to go through the VPN +# (The OpenVPN server machine may need to NAT +# the TUN/TAP interface to the internet in +# order for this to work properly). +# CAVEAT: May break client's network config if +# client's local DHCP server packets get routed +# through the tunnel. Solution: make sure +# client's local DHCP server is reachable via +# a more specific route than the default route +# of 0.0.0.0/0.0.0.0. +;push "redirect-gateway" + +# Certain Windows-specific network settings +# can be pushed to clients, such as DNS +# or WINS server addresses. CAVEAT: +# http://openvpn.net/faq.html#dhcpcaveats +;push "dhcp-option DNS 10.8.0.1" +;push "dhcp-option WINS 10.8.0.1" + +# Uncomment this directive to allow different +# clients to be able to "see" each other. +# By default, clients will only see the server. +# To force clients to only see the server, you +# will also need to appropriately firewall the +# server's TUN/TAP interface. +;client-to-client + +# Uncomment this directive if multiple clients +# might connect with the same certificate/key +# files or common names. This is recommended +# only for testing purposes. For production use, +# each client should have its own certificate/key +# pair. +# +# IF YOU HAVE NOT GENERATED INDIVIDUAL +# CERTIFICATE/KEY PAIRS FOR EACH CLIENT, +# EACH HAVING ITS OWN UNIQUE "COMMON NAME", +# UNCOMMENT THIS LINE OUT. +;duplicate-cn + +# The keepalive directive causes ping-like +# messages to be sent back and forth over +# the link so that each side knows when +# the other side has gone down. +# Ping every 10 seconds, assume that remote +# peer is down if no ping received during +# a 120 second time period. +keepalive 10 120 + +# For extra security beyond that provided +# by SSL/TLS, create an "HMAC firewall" +# to help block DoS attacks and UDP port flooding. +# +# Generate with: +# openvpn --genkey --secret ta.key +# +# The server and each client must have +# a copy of this key. +# The second parameter should be '0' +# on the server and '1' on the clients. +;tls-auth ta.key 0 # This file is secret + +# Select a cryptographic cipher. +# This config item must be copied to +# the client config file as well. +;cipher BF-CBC # Blowfish (default) +;cipher AES-128-CBC # AES +;cipher DES-EDE3-CBC # Triple-DES + +# Enable compression on the VPN link. +# If you enable it here, you must also +# enable it in the client config file. +comp-lzo + +# The maximum number of concurrently connected +# clients we want to allow. +;max-clients 100 + +# It's a good idea to reduce the OpenVPN +# daemon's privileges after initialization. +# +# You can uncomment this out on +# non-Windows systems. +;user nobody +;group nobody + +# The persist options will try to avoid +# accessing certain resources on restart +# that may no longer be accessible because +# of the privilege downgrade. +persist-key +persist-tun + +# Output a short status file showing +# current connections, truncated +# and rewritten every minute. +status openvpn-status.log + +# By default, log messages will go to the syslog (or +# on Windows, if running as a service, they will go to +# the "\Program Files\OpenVPN\log" directory). +# Use log or log-append to override this default. +# "log" will truncate the log file on OpenVPN startup, +# while "log-append" will append to it. Use one +# or the other (but not both). +;log openvpn.log +;log-append openvpn.log + +# Set the appropriate level of log +# file verbosity. +# +# 0 is silent, except for fatal errors +# 4 is reasonable for general usage +# 5 and 6 can help to debug connection problems +# 9 is extremely verbose +verb 3 + +# Silence repeating messages. At most 20 +# sequential messages of the same message +# category will be output to the log. +;mute 20 diff --git a/etc/openvpn/examples/static-home.conf b/etc/openvpn/examples/static-home.conf new file mode 100644 index 000000000..c96668746 --- /dev/null +++ b/etc/openvpn/examples/static-home.conf @@ -0,0 +1,72 @@ +# +# Sample OpenVPN configuration file for +# home using a pre-shared static key. +# +# '#' or ';' may be used to delimit comments. + +# Use a dynamic tun device. +# For Linux 2.2 or non-Linux OSes, +# you may want to use an explicit +# unit number such as "tun1". +# OpenVPN also supports virtual +# ethernet "tap" devices. +dev tun + +# Our OpenVPN peer is the office gateway. +remote 1.2.3.4 + +# 10.1.0.2 is our local VPN endpoint (home). +# 10.1.0.1 is our remote VPN endpoint (office). +ifconfig 10.1.0.2 10.1.0.1 + +# Our up script will establish routes +# once the VPN is alive. +up ./home.up + +# Our pre-shared static key +secret static.key + +# OpenVPN 2.0 uses UDP port 1194 by default +# (official port assignment by iana.org 11/04). +# OpenVPN 1.x uses UDP port 5000 by default. +# Each OpenVPN tunnel must use +# a different port number. +# lport or rport can be used +# to denote different ports +# for local and remote. +; port 1194 + +# Downgrade UID and GID to +# "nobody" after initialization +# for extra security. +; user nobody +; group nobody + +# If you built OpenVPN with +# LZO compression, uncomment +# out the following line. +; comp-lzo + +# Send a UDP ping to remote once +# every 15 seconds to keep +# stateful firewall connection +# alive. Uncomment this +# out if you are using a stateful +# firewall. +; ping 15 + +# Uncomment this section for a more reliable detection when a system +# loses its connection. For example, dial-ups or laptops that +# travel to other locations. +; ping 15 +; ping-restart 45 +; ping-timer-rem +; persist-tun +; persist-key + +# Verbosity level. +# 0 -- quiet except for fatal errors. +# 1 -- mostly quiet, but display non-fatal network errors. +# 3 -- medium output, good for normal operation. +# 9 -- verbose, good for troubleshooting +verb 3 diff --git a/etc/openvpn/examples/static-office.conf b/etc/openvpn/examples/static-office.conf new file mode 100644 index 000000000..68030cc94 --- /dev/null +++ b/etc/openvpn/examples/static-office.conf @@ -0,0 +1,69 @@ +# +# Sample OpenVPN configuration file for +# office using a pre-shared static key. +# +# '#' or ';' may be used to delimit comments. + +# Use a dynamic tun device. +# For Linux 2.2 or non-Linux OSes, +# you may want to use an explicit +# unit number such as "tun1". +# OpenVPN also supports virtual +# ethernet "tap" devices. +dev tun + +# 10.1.0.1 is our local VPN endpoint (office). +# 10.1.0.2 is our remote VPN endpoint (home). +ifconfig 10.1.0.1 10.1.0.2 + +# Our up script will establish routes +# once the VPN is alive. +up ./office.up + +# Our pre-shared static key +secret static.key + +# OpenVPN 2.0 uses UDP port 1194 by default +# (official port assignment by iana.org 11/04). +# OpenVPN 1.x uses UDP port 5000 by default. +# Each OpenVPN tunnel must use +# a different port number. +# lport or rport can be used +# to denote different ports +# for local and remote. +; port 1194 + +# Downgrade UID and GID to +# "nobody" after initialization +# for extra security. +; user nobody +; group nobody + +# If you built OpenVPN with +# LZO compression, uncomment +# out the following line. +; comp-lzo + +# Send a UDP ping to remote once +# every 15 seconds to keep +# stateful firewall connection +# alive. Uncomment this +# out if you are using a stateful +# firewall. +; ping 15 + +# Uncomment this section for a more reliable detection when a system +# loses its connection. For example, dial-ups or laptops that +# travel to other locations. +; ping 15 +; ping-restart 45 +; ping-timer-rem +; persist-tun +; persist-key + +# Verbosity level. +# 0 -- quiet except for fatal errors. +# 1 -- mostly quiet, but display non-fatal network errors. +# 3 -- medium output, good for normal operation. +# 9 -- verbose, good for troubleshooting +verb 3 diff --git a/etc/openvpn/examples/tls-home.conf b/etc/openvpn/examples/tls-home.conf new file mode 100644 index 000000000..daa4ea1ef --- /dev/null +++ b/etc/openvpn/examples/tls-home.conf @@ -0,0 +1,83 @@ +# +# Sample OpenVPN configuration file for +# home using SSL/TLS mode and RSA certificates/keys. +# +# '#' or ';' may be used to delimit comments. + +# Use a dynamic tun device. +# For Linux 2.2 or non-Linux OSes, +# you may want to use an explicit +# unit number such as "tun1". +# OpenVPN also supports virtual +# ethernet "tap" devices. +dev tun + +# Our OpenVPN peer is the office gateway. +remote 1.2.3.4 + +# 10.1.0.2 is our local VPN endpoint (home). +# 10.1.0.1 is our remote VPN endpoint (office). +ifconfig 10.1.0.2 10.1.0.1 + +# Our up script will establish routes +# once the VPN is alive. +up ./home.up + +# In SSL/TLS key exchange, Office will +# assume server role and Home +# will assume client role. +tls-client + +# Certificate Authority file +ca my-ca.crt + +# Our certificate/public key +cert home.crt + +# Our private key +key home.key + +# OpenVPN 2.0 uses UDP port 1194 by default +# (official port assignment by iana.org 11/04). +# OpenVPN 1.x uses UDP port 5000 by default. +# Each OpenVPN tunnel must use +# a different port number. +# lport or rport can be used +# to denote different ports +# for local and remote. +; port 1194 + +# Downgrade UID and GID to +# "nobody" after initialization +# for extra security. +; user nobody +; group nobody + +# If you built OpenVPN with +# LZO compression, uncomment +# out the following line. +; comp-lzo + +# Send a UDP ping to remote once +# every 15 seconds to keep +# stateful firewall connection +# alive. Uncomment this +# out if you are using a stateful +# firewall. +; ping 15 + +# Uncomment this section for a more reliable detection when a system +# loses its connection. For example, dial-ups or laptops that +# travel to other locations. +; ping 15 +; ping-restart 45 +; ping-timer-rem +; persist-tun +; persist-key + +# Verbosity level. +# 0 -- quiet except for fatal errors. +# 1 -- mostly quiet, but display non-fatal network errors. +# 3 -- medium output, good for normal operation. +# 9 -- verbose, good for troubleshooting +verb 3 diff --git a/etc/openvpn/examples/tls-office.conf b/etc/openvpn/examples/tls-office.conf new file mode 100644 index 000000000..f790f4699 --- /dev/null +++ b/etc/openvpn/examples/tls-office.conf @@ -0,0 +1,83 @@ +# +# Sample OpenVPN configuration file for +# office using SSL/TLS mode and RSA certificates/keys. +# +# '#' or ';' may be used to delimit comments. + +# Use a dynamic tun device. +# For Linux 2.2 or non-Linux OSes, +# you may want to use an explicit +# unit number such as "tun1". +# OpenVPN also supports virtual +# ethernet "tap" devices. +dev tun + +# 10.1.0.1 is our local VPN endpoint (office). +# 10.1.0.2 is our remote VPN endpoint (home). +ifconfig 10.1.0.1 10.1.0.2 + +# Our up script will establish routes +# once the VPN is alive. +up ./office.up + +# In SSL/TLS key exchange, Office will +# assume server role and Home +# will assume client role. +tls-server + +# Diffie-Hellman Parameters (tls-server only) +dh dh1024.pem + +# Certificate Authority file +ca my-ca.crt + +# Our certificate/public key +cert office.crt + +# Our private key +key office.key + +# OpenVPN 2.0 uses UDP port 1194 by default +# (official port assignment by iana.org 11/04). +# OpenVPN 1.x uses UDP port 5000 by default. +# Each OpenVPN tunnel must use +# a different port number. +# lport or rport can be used +# to denote different ports +# for local and remote. +; port 1194 + +# Downgrade UID and GID to +# "nobody" after initialization +# for extra security. +; user nobody +; group nobody + +# If you built OpenVPN with +# LZO compression, uncomment +# out the following line. +; comp-lzo + +# Send a UDP ping to remote once +# every 15 seconds to keep +# stateful firewall connection +# alive. Uncomment this +# out if you are using a stateful +# firewall. +; ping 15 + +# Uncomment this section for a more reliable detection when a system +# loses its connection. For example, dial-ups or laptops that +# travel to other locations. +; ping 15 +; ping-restart 45 +; ping-timer-rem +; persist-tun +; persist-key + +# Verbosity level. +# 0 -- quiet except for fatal errors. +# 1 -- mostly quiet, but display non-fatal network errors. +# 3 -- medium output, good for normal operation. +# 9 -- verbose, good for troubleshooting +verb 3 diff --git a/etc/openvpn/examples/xinetd-client-config b/etc/openvpn/examples/xinetd-client-config new file mode 100644 index 000000000..03c5c1faa --- /dev/null +++ b/etc/openvpn/examples/xinetd-client-config @@ -0,0 +1,11 @@ +# This OpenVPN config file +# is the client side counterpart +# of xinetd-server-config + +dev tun +ifconfig 10.4.0.1 10.4.0.2 +remote my-server +port 1194 +user nobody +secret /root/openvpn/key +inactive 600 diff --git a/etc/openvpn/examples/xinetd-server-config b/etc/openvpn/examples/xinetd-server-config new file mode 100644 index 000000000..803a6f8ff --- /dev/null +++ b/etc/openvpn/examples/xinetd-server-config @@ -0,0 +1,25 @@ +# An xinetd configuration file for OpenVPN. +# +# This file should be renamed to openvpn or something suitably +# descriptive and copied to the /etc/xinetd.d directory. +# xinetd can then be made aware of this file by restarting +# it or sending it a SIGHUP signal. +# +# For each potential incoming client, create a separate version +# of this configuration file on a unique port number. Also note +# that the key file and ifconfig endpoints should be unique for +# each client. This configuration assumes that the OpenVPN +# executable and key live in /root/openvpn. Change this to fit +# your environment. + +service openvpn_1 +{ + type = UNLISTED + port = 1194 + socket_type = dgram + protocol = udp + wait = yes + user = root + server = /root/openvpn/openvpn + server_args = --inetd --dev tun --ifconfig 10.4.0.2 10.4.0.1 --secret /root/openvpn/key --inactive 600 --user nobody +} diff --git a/etc/vpnc/default.conf b/etc/vpnc/default.conf new file mode 100644 index 000000000..914f827fd --- /dev/null +++ b/etc/vpnc/default.conf @@ -0,0 +1,17 @@ +# example vpnc configuration file +# see vpnc --long-help for details + +#Interface name tun0 +#IKE DH Group dh2 +#Perfect Forward Secrecy nopfs + +# You may replace this script with something better +#Script /etc/vpnc/vpnc-script +# Enable this option for NAT traversal +#UDP Encapsulate + +#IPSec gateway my.gateway.com +#IPSec ID someid +#IPSec secret somesecret +#Xauth username myusername +#Xauth password mypassword diff --git a/etc/vpnc/vpnc-script b/etc/vpnc/vpnc-script new file mode 100755 index 000000000..93de44951 --- /dev/null +++ b/etc/vpnc/vpnc-script @@ -0,0 +1,414 @@ +#!/bin/sh +#* reason -- why this script was called, one of: pre-init connect disconnect +#* VPNGATEWAY -- vpn gateway address (always present) +#* TUNDEV -- tunnel device (always present) +#* INTERNAL_IP4_ADDRESS -- address (always present) +#* INTERNAL_IP4_NETMASK -- netmask (often unset) +#* INTERNAL_IP4_DNS -- list of dns serverss +#* INTERNAL_IP4_NBNS -- list of wins servers +#* CISCO_DEF_DOMAIN -- default domain name +#* CISCO_BANNER -- banner from server +#* CISCO_SPLIT_INC -- number of networks in split-network-list +#* CISCO_SPLIT_INC_%d_ADDR -- network address +#* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0) +#* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24) +#* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0) +#* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0) +#* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0) + +#set -x + +OS="`uname -s`" + +VPNC_WIN_SCRIPT=/etc/vpnc/vpnc-script-win + +case "$OS" in + CYGWIN_NT*) + # why does "--kernel-name" include "--kernel-release" on cygwin?! + exec $VPNC_WIN_SCRIPT + ;; + *) + ;; +esac + +DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute +RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup + +# some systems, eg. Darwin & FreeBSD, prune /var/run on boot +if ! [ -d "/var/run/vpnc" ]; then + mkdir -p /var/run/vpnc +fi + +# stupid SunOS: no blubber in /usr/local/bin ... (on stdout) +IPROUTE="`which ip | grep '^/' 2> /dev/null`" + +if [ "$OS" = "Linux" ]; then + ifconfig_syntax_ptp="pointopoint" + route_syntax_gw="gw" + route_syntax_del="del" + route_syntax_netmask="netmask" +else + ifconfig_syntax_ptp="" + route_syntax_gw="" + route_syntax_del="delete" + route_syntax_netmask="-netmask" +fi + +#### + +kernel_is_2_6_or_above() { + case `uname -r` in + 1.*|2.[012345]*) + return 1 + ;; + *) + return 0 + ;; + esac +} + +do_pre_init() { + if [ "$OS" = "Linux" ]; then + if (exec 6<> /dev/net/tun) > /dev/null 2>&1 ; then + : + else # can't open /dev/net/tun + test -e /proc/sys/kernel/modprobe && `cat /proc/sys/kernel/modprobe` tun 2>/dev/null + # fix for broken devfs in kernel 2.6.x + if [ "`readlink /dev/net/tun`" = misc/net/tun \ + -a ! -e /dev/net/misc/net/tun -a -e /dev/misc/net/tun ] ; then + ln -sf /dev/misc/net/tun /dev/net/tun + fi + # make sure tun device exists + if [ ! -e /dev/net/tun ]; then + mkdir -p /dev/net + mknod -m 0640 /dev/net/tun c 10 200 + fi + # workaround for a possible latency caused by udev, sleep max. 10s + if kernel_is_2_6_or_above ; then + for x in `seq 100` ; do + (exec 6<> /dev/net/tun) > /dev/null 2>&1 && break; + sleep 0.1 + done + fi + fi + elif [ "$OS" = "FreeBSD" ]; then + if [ ! -e /dev/tun ]; then + kldload if_tun + fi + elif [ "$OS" = "NetBSD" ]; then + : + elif [ "$OS" = "OpenBSD" ]; then + : + elif [ "$OS" = "SunOS" ]; then + : + elif [ "$OS" = "Darwin" ]; then + : + fi +} + +do_ifconfig() { + ifconfig "$TUNDEV" inet "$INTERNAL_IP4_ADDRESS" $ifconfig_syntax_ptp "$INTERNAL_IP4_ADDRESS" netmask 255.255.255.255 mtu 1412 up +} + +destroy_tun_device() { + case "$OS" in + NetBSD) # and probably others... + ifconfig "$TUNDEV" destroy + ;; + esac +} + +if [ -n "$IPROUTE" ]; then + fix_ip_get_output () { + sed 's/cache//;s/metric \?[0-9]\+ [0-9]\+//g;s/hoplimit [0-9]\+//g' + } + + set_vpngateway_route() { + $IPROUTE route add `$IPROUTE route get "$VPNGATEWAY" | fix_ip_get_output` + $IPROUTE route flush cache + } + + del_vpngateway_route() { + $IPROUTE route $route_syntax_del "$VPNGATEWAY" + $IPROUTE route flush cache + } + + set_default_route() { + $IPROUTE route | grep '^default' | fix_ip_get_output > "$DEFAULT_ROUTE_FILE" + $IPROUTE route $route_syntax_del default + $IPROUTE route add default dev "$TUNDEV" + $IPROUTE route flush cache + } + + set_network_route() { + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + $IPROUTE route add "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + $IPROUTE route flush cache + } + + reset_default_route() { + $IPROUTE route $route_syntax_del default > /dev/null 2>&1 + $IPROUTE route add `cat "$DEFAULT_ROUTE_FILE"` + $IPROUTE route flush cache + } + + del_network_route() { + # linux deletes routes automatically if the device is shut down + return + #NETWORK="$1" + #NETMASK="$2" + #NETMASKLEN="$3" + #$IPROUTE route $route_syntax_del "$NETWORK/$NETMASKLEN" dev "$TUNDEV" + #$IPROUTE route flush cache + } +else + get_default_gw() { + # isn't -n supposed to give --numeric output? + # apperently not... + netstat -r -n | sed 's/default/0.0.0.0/' | grep '^0.0.0.0' | awk '{print $2}' + } + + set_vpngateway_route() { + route add -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`" + } + + del_vpngateway_route() { + route $route_syntax_del -host "$VPNGATEWAY" + } + + set_default_route() { + DEFAULTGW="`get_default_gw`" + echo "$DEFAULTGW" > "$DEFAULT_ROUTE_FILE" + route $route_syntax_del default "$DEFAULTGW" + route add default $route_syntax_gw "$INTERNAL_IP4_ADDRESS" + } + + set_network_route() { + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + route add -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" + } + + reset_default_route() { + route $route_syntax_del default + route add default $route_syntax_gw `cat "$DEFAULT_ROUTE_FILE"` + } + + del_network_route() { + case "$OS" in + Linux|NetBSD) # and probably others... + # routes are deleted automatically on device shutdown + return + ;; + esac + NETWORK="$1" + NETMASK="$2" + NETMASKLEN="$3" + route $route_syntax_del -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" + } +fi + +write_resolvconf() { + grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 || cp -- /etc/resolv.conf "$RESOLV_CONF_BACKUP" + NEW_RESOLVCONF="#@VPNC_GENERATED@ -- this file is generated by vpnc +# and will be overwritten by vpnc +# as long as the above mark is intact" + + # Don't step on INTERNAL_IP4_DNS value, use a temporary variable + INTERNAL_IP4_DNS_TEMP="$INTERNAL_IP4_DNS" + exec 6< /etc/resolv.conf + while read LINE <&6 ; do + case "$LINE" in + nameserver*) + if [ -n "$INTERNAL_IP4_DNS_TEMP" ]; then + read ONE_NAMESERVER INTERNAL_IP4_DNS_TEMP <<-EOF + $INTERNAL_IP4_DNS_TEMP +EOF + LINE="nameserver $ONE_NAMESERVER" + else + LINE="" + fi + ;; + domain*|search*) + if [ -n "$CISCO_DEF_DOMAIN" ]; then + LINE="$LINE $CISCO_DEF_DOMAIN" + CISCO_DEF_DOMAIN="" + fi + ;; + esac + NEW_RESOLVCONF="$NEW_RESOLVCONF +$LINE" + done + exec 6<&- + + for i in $INTERNAL_IP4_DNS_TEMP ; do + NEW_RESOLVCONF="$NEW_RESOLVCONF +nameserver $i" + done + if [ -n "$CISCO_DEF_DOMAIN" ]; then + NEW_RESOLVCONF="$NEW_RESOLVCONF +search $CISCO_DEF_DOMAIN" + fi + echo "$NEW_RESOLVCONF" > /etc/resolv.conf + + if [ "$OS" = "Darwin" ]; then + case "`uname -r`" in + # Skip for pre-10.4 systems + 4.*|5.*|6.*|7.*) + ;; + # 10.4 and later require use of scutil for DNS to work properly + *) + scutil >/dev/null 2>&1 <<-EOF + open + d.init + d.add ServerAddresses * $INTERNAL_IP4_DNS + set State:/Network/Service/$TUNDEV/DNS + get State:/Network/Global/IPv4 + d.remove PrimaryService + d.remove PrimaryInterface + d.add Addresses * $INTERNAL_IP4_ADDRESS + d.add SubnetMasks * 255.255.255.255 + d.add InterfaceName $TUNDEV + set State:/Network/Service/$TUNDEV/IPv4 + close + EOF + if [ -n "$CISCO_DEF_DOMAIN" ]; then + scutil >/dev/null 2>&1 <<-EOF + open + get State:/Network/Service/$TUNDEV/DNS + d.add DomainName $CISCO_DEF_DOMAIN + d.add SearchDomains * $CISCO_DEF_DOMAIN + d.add SupplementalMatchDomains * $CISCO_DEF_DOMAIN + set State:/Network/Service/$TUNDEV/DNS + close + EOF + fi + # Uncomment the following if/fi pair to use multiple + # DNS matching when available. When multiple DNS matching + # is present, anything reading the /etc/resolv.conf file + # directly will probably not work as intended. + #if [ -z "$CISCO_DEF_DOMAIN" ]; then + # Cannot use multiple DNS matching without a domain + scutil >/dev/null 2>&1 <<-EOF + open + get State:/Network/Service/$TUNDEV/IPv4 + d.add OverridePrimary # 1 + set State:/Network/Service/$TUNDEV/IPv4 + close + EOF + #fi + ;; + esac + fi +} + +reset_resolvconf() { + if [ ! -e "$RESOLV_CONF_BACKUP" ]; then + return + fi + grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 && cat "$RESOLV_CONF_BACKUP" > /etc/resolv.conf + rm -f -- "$RESOLV_CONF_BACKUP" + + if [ "$OS" = "Darwin" ]; then + case "`uname -r`" in + # Skip for pre-10.4 systems + 4.*|5.*|6.*|7.*) + ;; + # 10.4 and later require use of scutil for DNS to work properly + *) + scutil >/dev/null 2>&1 <<-EOF + open + remove State:/Network/Service/$TUNDEV/IPv4 + remove State:/Network/Service/$TUNDEV/DNS + close + EOF + ;; + esac + fi +} + +do_connect() { + if [ -n "$CISCO_BANNER" ]; then + echo "Connect Banner:" + echo "$CISCO_BANNER" | while read LINE ; do echo "|" "$LINE" ; done + echo + fi + + do_ifconfig + set_vpngateway_route + if [ -n "$CISCO_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" + eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" + eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" + set_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" + i=`expr $i + 1` + done + for i in $INTERNAL_IP4_DNS ; do + set_network_route "$i" "255.255.255.255" "32" + done + else + set_default_route + fi + + if [ -n "$INTERNAL_IP4_DNS" ]; then + write_resolvconf + fi +} + +do_disconnect() { + destroy_tun_device + if [ -n "$CISCO_SPLIT_INC" ]; then + i=0 + while [ $i -lt $CISCO_SPLIT_INC ] ; do + eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" + eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" + eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" + del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" + i=`expr $i + 1` + done + for i in $INTERNAL_IP4_DNS ; do + del_network_route "$i" "255.255.255.255" "32" + done + else + if [ -s "$DEFAULT_ROUTE_FILE" ]; then + reset_default_route + rm -f -- "$DEFAULT_ROUTE_FILE" + fi + fi + + del_vpngateway_route + + if [ -n "$INTERNAL_IP4_DNS" ]; then + reset_resolvconf + fi +} + +#### + +if [ -z "$reason" ]; then + echo "this script must be called from vpnc" 1>&2 + exit 1 +fi + +case "$reason" in + pre-init) + do_pre_init + ;; + connect) + do_connect + ;; + disconnect) + do_disconnect + ;; + *) + echo "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2 + exit 1 + ;; +esac + +exit 0 diff --git a/hooks/arch-base b/hooks/arch-base index b613901dc..afaad3592 100644 --- a/hooks/arch-base +++ b/hooks/arch-base @@ -7,4 +7,5 @@ run_hook () ln -s /sbin/halt /sbin/reboot ln -s /bin/chroot /usr/bin/chroot ln -s /sbin/killall5 /bin/pidof + ln -s /usr/bin/netcat /usr/bin/nc } diff --git a/install.conf b/install.conf index ab8d4ddc3..9846d8864 100644 --- a/install.conf +++ b/install.conf @@ -14,7 +14,7 @@ FILES="" # default is set to ftp install media # # Please change the other hooks only if you know what you are doing. -HOOKS="arch-ftp-install arch-bootmessage arch-motd arch-memtest arch-pam arch-shadow arch-base arch-hwdetect arch-udev ide pata scsi sata arch-net arch-isdn arch-pcmcia usb usbinput fw arch-floppy arch-raid arch-lvm2 arch-encrypt arch-filesystems arch-keymap arch-remote arch-cpufreq arch-links arch-naim arch-pacman arch-addons arch-kexec arch-ppp arch-pppoe arch-lilo arch-grub arch-iptables arch-capi4k arch-pciutils" +HOOKS="arch-ftp-install arch-bootmessage arch-motd arch-memtest arch-pam arch-shadow arch-base arch-hwdetect arch-udev ide pata scsi sata arch-net arch-isdn arch-pcmcia usb usbinput fw arch-floppy arch-raid arch-lvm2 arch-encrypt arch-filesystems arch-keymap arch-remote arch-cpufreq arch-fb arch-links arch-naim arch-pacman arch-addons arch-kexec arch-ppp arch-pppoe arch-lilo arch-grub arch-iptables arch-capi4k arch-pciutils arch-usbutils arch-openvpn arch-vpnc" # # adding pxelinux hook if mkpxelinux is used. if [ "${RUNPROGRAM}" = "mkpxelinux" ]; then diff --git a/install/arch-base b/install/arch-base index dfc3d8bb9..47269ee88 100644 --- a/install/arch-base +++ b/install/arch-base @@ -29,7 +29,7 @@ install () ### adding needed programs from running system add_file "${CONFIG}" "/config" SCRIPT="arch-base" - BINARIES="init agetty mount modprobe modinfo umount basename du clear env head id md5sum nano nc printf tail tee test tr tty uptime wc which whoami xargs yes syslog-ng bash swapon uniq cut seq snarf find sort fdisk sfdisk cfdisk gawk cp mv shutdown free ls rm sed test less chgrp chmod chown date df dialog dmesg egrep fgrep grep hostname kill killall killall5 more ps pwd rmdir stty sync tar touch uname vim lsmod modinfo rmmod hdparm true mktemp chroot dirname expr bzip2 hwclock depmod su" + BINARIES="init agetty mount modprobe modinfo umount basename du clear env head id md5sum nano netcat printf tail tee test tr tty uptime wc which whoami xargs yes syslog-ng bash swapon uniq cut seq snarf find sort fdisk sfdisk cfdisk gawk cp mv shutdown free ls rm sed test less chgrp chmod chown date df dialog dmesg egrep fgrep grep hostname kill killall killall5 more ps pwd rmdir stty sync tar touch uname vim lsmod modinfo rmmod hdparm true mktemp chroot dirname expr bzip2 hwclock depmod su" add_file "/usr/bin/reset" add_file "/sbin/swapoff" add_file "/sbin/halt" diff --git a/install/arch-fb b/install/arch-fb new file mode 100644 index 000000000..d27aaaf20 --- /dev/null +++ b/install/arch-fb @@ -0,0 +1,17 @@ +# Created by Tobias Powalowski + +install () +{ + MODULES=" $(checked_modules "/video/" | grep 'fb')" + + BINARIES="" + FILES="" + SCRIPT="" +} + +help () +{ +cat< + +install () +{ + MODULES="" + BINARIES="openvpn" + FILES="" + SCRIPT="" + CONFIG_FILES="README client.conf firewall.sh home.up loopback-client loopback-server office.up openvpn-shutdown.sh openvpn-startup.sh server.conf static-home.conf static-office.conf tls-home.conf tls-office.conf xinetd-client-config xinetd-server-config" + for i in $CONFIG_FILES; do + add_file "/etc/archboot/etc/openvpn/examples/$i" "/etc/openvpn/examples/$i" + done +} + +help () +{ +cat< + +install () +{ + MODULES="" + BINARIES="lsusb" + FILES="" + SCRIPT="" + add_file "/usr/share/usb.ids" +} + +help () +{ +cat< + +install () +{ + MODULES="" + BINARIES="pcf2vpnc vpnc vpnc-disconnect" + FILES="" + SCRIPT="" + add_file "/etc/rc.d/vpnc" + add_file "/etc/archboot/etc/vpnc/default.conf" "/etc/vpnc/default.conf" + add_file "/etc/archboot/etc/vpnc/vpnc-script" "/etc/vpnc/vpnc-script" + +} + +help () +{ +cat<