add tesuite completion

CHANGELOG

@@ -1,7 +1,7 @@
 On the road to 2024.08:
 ---
-quickinst:
-- updated usage information
+Environment:
+- updated and unified usage information in all scripts
 ---
 Highlights 2024.07:
 - kernel 6.10.x

usr/bin/archboot-binary-check.sh

@@ -3,12 +3,12 @@
 # created by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
 _usage () {
-    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Check on missing binaries\e[m"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Check On Missing Binaries\e[m"
     echo "------------------------------------"
     echo "This will check binaries from package, if they exist"
     echo "and report missing to binary.log"
     echo ""
-    echo -e "Usage: \e[1m\e${_BASENAME} <package>\e[m"
+    echo -e "Usage: \e[1m${_BASENAME} <package>\e[m"
     exit 0
 }
 [[ -z "${1}" ]] && _usage

usr/bin/archboot-bootloader.sh

@@ -3,6 +3,7 @@
 # created by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
 . /usr/lib/archboot/bootloader.sh
+[[ -z "${1}" || "${1}" != "run" ]] && _usage
 _SHIM=$(mktemp -d shim.XXX)
 _SHIM32=$(mktemp -d shim32.XXX)
 _SHIMAA64=$(mktemp -d shimaa64.XXX)

usr/bin/archboot-detect-vconsole.sh

@@ -4,7 +4,18 @@
 #  sets bigger font on bigger display resolutions
 #  by Tobias Powalowski <tpowa@archlinux.org>
 #
-# wait for modules to initialize cmompletely
+. /usr/lib/archboot/common.sh
+_usage() {
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Detect Big Screen\e[m"
+    echo -e "\e[1m----------------------------\e[m"
+    echo "Detect big screen on boot and change to bigger font afterwards."
+    echo ""
+    echo -e "Usage: \e[1m${_BASENAME} run\e[m"
+    exit 0
+}
+[[ -z "${1}" || "${1}" != "run" ]] && _usage
+_root_check
+# wait for modules to initialize completely
 udevadm wait --settle /dev/fb0
 # get screen setting mode from /sys
 _FB_SIZE="$(rg -o ':(.*)x' -r '$1' /sys/class/graphics/fb0/modes 2>/dev/null)"

usr/bin/archboot-hwsim.sh

@@ -2,8 +2,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 # archboot-hwsim.sh - setup a test SSID
 # by Tobias Powalowski <tpowa@archlinux.org>
-# usage(exitvalue)
-# outputs a usage message and exits with value
 . /usr/lib/archboot/common.sh
 _usage()
 {

usr/bin/archboot-not-installed.sh

@@ -3,7 +3,7 @@
 # created by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
 _usage () {
-    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Check not installed packages\e[m"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Check Not Installed Packages\e[m"
     echo -e "\e[1m---------------------------------------\e[m"
     echo "Check the system for uninstalled packages with pacman."
     echo ""

usr/bin/archboot-qemu.sh

@@ -3,6 +3,7 @@
 # created by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
 . /usr/lib/archboot/qemu.sh
+[[ -z "${1}" || "${1}" != "run" ]] && _usage
 _UBOOT=$(mktemp -d uboot.XXX)
 _OVMF32=$(mktemp -d ovmf32.XXX)
 _OVMF=$(mktemp -d ovmf.XXX)

usr/bin/archboot-restore-usbstick.sh

@@ -1,19 +1,16 @@
 #!/usr/bin/env bash
 # SPDX-License-Identifier: GPL-3.0-or-later
-# 
-#    archboot-restore-usbstick.sh - restore usbstick to FAT32
-#    by Tobias Powalowski <tpowa@archlinux.org>
-# usage(exitvalue)
-# outputs a usage message and exits with value
+# archboot-restore-usbstick.sh - restore usbstick to FAT32
+# by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
 _usage()
 {
-    echo -e "\e[1mWelcome to \e[36mARCHBOOT\e[m \e[1m- RESTORE USB STICK:\e[m"
-    echo -e "\e[1m----------------------------------------\e[m"
+    echo -e "\e[1m\e[36mARCHBOOT\e[m \e[1m- Restore USB Stick\e[m"
+    echo -e "\e[1m----------------------------\e[m"
     echo -e "This script restores an USB device to a \e[1mFAT32\e[m device."
-    echo -e "\e[91mWARNING: ALL DATA WILL BE LOST ON THE DEVICE! \e[m"
+    echo -e "\e[1m\e[91mWARNING: ALL DATA WILL BE LOST ON THE DEVICE! \e[m"
     echo ""
-    echo -e "usage: \e[1m${_BASENAME} <device>\e[m"
+    echo -e "Usage: \e[1m${_BASENAME} <device>\e[m"
     exit 0
 }
 ##################################################

usr/bin/archboot-rsync-backup.sh

@@ -2,8 +2,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 # rsync-backup.sh - copy files recursivly with rsync
 # by Tobias Powalowski <tpowa@archlinux.org>
-# usage(exitvalue)
-# outputs a usage message and exits with value
 . /usr/lib/archboot/common.sh
 _usage()
 {

usr/bin/archboot-secureboot-keys.sh

@@ -1,8 +1,8 @@
 #!/usr/bin/env bash
 # created by Tobias Powalowski <tpowa@archlinux.org>
 . /usr/lib/archboot/common.sh
-usage () {
-    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Generate Secure Boot keys, MOK files\e[m"
+_usage () {
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Generate Secure Boot Keys, MOK Files\e[m"
     echo -e "\e[1m-----------------------------------------------\e[m"
     echo "This script generates all needed keys for a Secure Boot setup."
     echo -e "It will include the \e[1m2\e[m needed Microsoft certificates, in order"
@@ -12,18 +12,18 @@ usage () {
     echo -e "Usage: \e[1m${_BASENAME} -name=<your name> <directory>\e[m"
     exit 0
 }
-[[ -z "${1}" || -z "${2}" ]] && usage
+[[ -z "${1}" || -z "${2}" ]] && _usage
 _DIR="${2}"
 while [ $# -gt 0 ]; do
-	case ${1} in
-		-name=*|--name=*) NAME="$(echo "${1}" | rg -o '=(.*)' -r '$1')" ;;
-		-h|--h|?) usage ;; 
+    case ${1} in
+        -name=*|--name=*) NAME="$(echo "${1}" | rg -o '=(.*)' -r '$1')" ;;
+        -h|--h|?) _usage ;;
         esac
-	shift
+    shift
 done
 if [[ -z "${NAME}" ]]; then
     echo "ERROR: no name specified"
-    usage
+    _usage
     #shellcheck disable=2317
     exit 1
 fi
@@ -71,7 +71,7 @@ EOF
     echo "Finished: Keys created in ${_DIR}"
 else
     echo "ERROR: no directory specified"
-    usage
+    _usage
     #shellcheck disable=2317
     exit 1
 fi

usr/bin/archboot-server-update.sh

@@ -5,11 +5,11 @@
 . /etc/archboot/server-update.conf
 . /usr/lib/archboot/common.sh
 _usage () {
-    echo -e "\e[1mUpdate archboot server with new images\e[m"
-    echo -e "\e[1m---------------------------------------------\e[m"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Update Server To New Image\e[m"
+    echo -e "\e[1m-------------------------------------\e[m"
     echo "Check on new packages and release new images to server."
     echo ""
-    echo -e "usage: \e[1m${_BASENAME} run\e[m"
+    echo -e "Usage: \e[1m${_BASENAME} run\e[m"
     exit 0
 }
 [[ -z "${1}" || "${1}" != "run" ]] && _usage
@@ -32,7 +32,7 @@ for i in ${_SERVER_ARCH}; do
     for k in ${_TRIGGER}; do
         # if trigger successful, release new image to server
         if rg -qw "${k}" "${i}"/var/log/pacman.log; then
-            archboot-"${i}"-server-release.sh || echo "Error: ${i} release!" >> error.log
+            archboot-"${i}"-server-release.sh run || echo "Error: ${i} release!" >> error.log
             break
         fi
     done

usr/bin/archboot-update.sh

@@ -13,7 +13,7 @@
 . /usr/lib/archboot/update/plasma.sh
 . /usr/lib/archboot/update/sway.sh
 
-[[ -z "${1}" ]] && usage
+[[ -z "${1}" ]] && _usage
 while [ $# -gt 0 ]; do
     case ${1} in
         -u|--u|-update|--update) _D_SCRIPTS="1" ;;
@@ -28,8 +28,8 @@ while [ $# -gt 0 ]; do
         -custom-xorg|--custom-xorg) _CUSTOM_X="1" ;;
         -custom-wayland|--custom-wayland) _CUSTOM_WAYLAND="1" ;;
         -full-system|--full-system) _FULL_SYSTEM="1" ;;
-        -h|--h|-help|--help|?) usage ;;
-        *) usage ;;
+        -h|--h|-help|--help|?) _usage ;;
+        *) _usage ;;
         esac
     shift
 done

usr/lib/archboot/bootloader.sh

@@ -12,6 +12,15 @@ _SHIM_AA64_RPM="aarch64/shim-aa64-${_SHIM_VERSION}-${_SHIM_RELEASE}.aarch64.rpm"
 _ARCH_SERVERDIR="/${_PUB}/src/bootloader"
 _GRUB_ISO="/usr/share/archboot/grub/archboot-iso-grub.cfg"
 
+_usage() {
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Bootloader\e[m"
+    echo -e "\e[1m---------------------\e[m"
+    echo "Upload bootloaders to archboot server."
+    echo ""
+    echo -e "Usage: \e[1m${_BASENAME} run\e[m"
+    exit 0
+}
+
 _grub_mkstandalone() {
     #shellcheck disable=SC2086
     ${1} ${2} grub-mkstandalone -d "/usr/lib/grub/${_GRUB_ARCH}" -O "${_GRUB_ARCH}" \

usr/lib/archboot/iso.sh

@@ -7,7 +7,7 @@ _ISODIR="$(mktemp -d ISODIR.XXX)"
 _BOOTLOADER="/usr/share/archboot/bootloader"
 
 _usage () {
-    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Create ${_ARCH} USB/CD Images\e[m"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Create ${_ARCH} USB/CD Image\e[m"
     echo -e "\e[1m--------------------------------------\e[m"
     echo "This will create an archboot iso image."
     echo ""

usr/lib/archboot/qemu.sh

@@ -14,6 +14,15 @@ _UBOOT_URL="http://ftp.us.debian.org/debian/pool/main/u/u-boot"
 _UBOOT_DEB="u-boot-qemu_${_UBOOT_VERSION}+${_UBOOT_RELEASE}.deb"
 _ARCH_SERVERDIR="/${_PUB}/src/qemu"
 
+_usage() {
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Qemu\e[m"
+    echo -e "\e[1m---------------\e[m"
+    echo "Upload qemu files to archboot server."
+    echo ""
+    echo -e "Usage: \e[1m${_BASENAME} run\e[m"
+    exit 0
+}
+
 _prepare_files () {
     # download packages from fedora server
     echo "Downloading Fedora OVMF and Debian UBOOT..."

usr/lib/archboot/release.sh

@@ -17,8 +17,8 @@ _CONFIG_LOCAL="${_ARCH}-local.conf"
 _W_DIR="$(mktemp -u archboot-release.XXX)"
 
 _usage () {
-    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Create Archboot Release Image\e[m"
-    echo -e "\e[1m----------------------------------------\e[m"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Create Release Images\e[m"
+    echo -e "\e[1m--------------------------------\e[m"
     echo "This will create an archboot release image in <directory>."
     echo "You can specify a certain <server> with an archboot repository."
     echo ""

usr/lib/archboot/run/container-tarball.sh

@@ -23,10 +23,11 @@ elif echo "${_BASENAME}" | rg -qw 'riscv64'; then
 fi
 
 _usage () {
-    echo "CREATE ${_CAP_ARCH} PACMAN CHROOT"
-    echo "-----------------------------"
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Create ${_CAP_ARCH} Pacman Container\e[m"
+    echo -e "\e[1m------------------------------------------\e[m"
     echo "This will create the ${_ARCH} pacman container tarball."
-    echo "usage: ${_BASENAME} <build-directory>"
+    echo ""
+    echo -e "Usage: \e[1m${_BASENAME} <build-directory>\e[m"
     exit 0
 }
 

usr/lib/archboot/run/server-release.sh

@@ -2,6 +2,7 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 . /usr/lib/archboot/common.sh
 . /usr/lib/archboot/server.sh
+[[ -z "${1}" || "${1}" != "run" ]] && _usage
 _root_check
 _container_check
 if echo "${_BASENAME}" | rg -qw 'riscv64' || echo "${_BASENAME}" | rg -qw 'aarch64'; then

usr/lib/archboot/server.sh

@@ -5,6 +5,15 @@
 . /usr/lib/archboot/container.sh
 _ISO_BUILD_DIR="$(mktemp -d "${_ISO_HOME_ARCH}"/server-release.XXX)"
 
+_usage() {
+    echo -e "\e[1m\e[36mArchboot\e[m\e[1m - Server Release\e[m"
+    echo -e "\e[1m-------------------------\e[m"
+    echo "Upload new image to archboot server."
+    echo ""
+    echo -e "Usage: \e[1m${_BASENAME} run\e[m"
+    exit 0
+}
+
 _update_pacman_container() {
     if [[ "${_ARCH}" == "aarch64" ]]; then
         _ARCH_DIR="${_PACMAN_AARCH64}"

usr/lib/archboot/update/update.sh

@@ -27,7 +27,7 @@ _graphic_options() {
     fi
 }
 
-usage () {
+_usage () {
     echo -e "\e[1mManage \e[36mArchboot\e[m\e[1m - Environment:\e[m"
     echo -e "\e[1m------------------------------\e[m"
     echo -e " \e[1m-help\e[m            This message."

usr/share/archboot/base/etc/systemd/system/detect-vconsole.service

@@ -8,4 +8,4 @@ After=systemd-udev-trigger.service
 [Service]
 Type=oneshot
 RemainAfterExit=yes
-ExecStart=/usr/bin/detect-vconsole.sh
+ExecStart=/usr/bin/detect-vconsole.sh run

usr/share/archboot/net/etc/elinks/bookmarks

@@ -1,3 +1,3 @@
-Arch Linux - Archboot Home  	https://bit.ly/archboot-html	0
+Arch Linux - Archboot Home  	https://archboot.com	0
 Arch Linux - Wiki	https://wiki.archlinux.org/	0	
 Arch Linux - Installation guide 	https://wiki.archlinux.org/title/Installation_Guide	0	

usr/share/bash-completion/completions/testsuite

@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# created by Tobias Powalowski <tpowa@archlinux.org>
+_testsuite()
+{
+    local cur prev OPTS
+    COMPREPLY=()
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    prev="${COMP_WORDS[COMP_CWORD-1]}"
+    case $prev in
+        run)
+            return 0
+            ;;
+    esac
+    case $cur in
+        *)
+            OPTS="run"
+            COMPREPLY=( $(compgen -W "${OPTS[*]}" -- $cur) )
+            return 0
+            ;;
+    esac
+    compopt -o bashdefault -o default
+    return 0
+}
+complete -F _testsuite testsuite

usr/share/bash-completion/completions/update

@@ -2,23 +2,23 @@
 # created by Tobias Powalowski <tpowa@archlinux.org>
 _update()
 {
-	local cur prev OPTS
-	COMPREPLY=()
-	cur="${COMP_WORDS[COMP_CWORD]}"
-	prev="${COMP_WORDS[COMP_CWORD-1]}"
-	case $prev in
-		-*)
-			return 0
-			;;
-	esac
-	case $cur in
-		*)
-			OPTS="$(update | rg '\-[a-z]' | choose 0 | sd '\x1B\[[0-9;]*[a-zA-Z]' '')"
-			COMPREPLY=( $(compgen -W "${OPTS[*]}" -- $cur) )
-			return 0
-			;;
-	esac
-	compopt -o bashdefault -o default
-	return 0
+    local cur prev OPTS
+    COMPREPLY=()
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    prev="${COMP_WORDS[COMP_CWORD-1]}"
+    case $prev in
+        -*)
+            return 0
+            ;;
+    esac
+    case $cur in
+        *)
+            OPTS="$(update | rg '\-[a-z]' | choose 0 | sd '\x1B\[[0-9;]*[a-zA-Z]' '')"
+            COMPREPLY=( $(compgen -W "${OPTS[*]}" -- $cur) )
+            return 0
+            ;;
+    esac
+    compopt -o bashdefault -o default
+    return 0
 }
 complete -F _update update